612603
2
Zoom out
Zoom in
Previous page
1/6
Next page
RQT5559
2
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
System SB-CSS135
Speakers x 3 SB-AFC135
Please check and identify the supplied accessories.
Speaker set-up
Attach the rubber feet to the speaker
The 3 speakers are the same.
The 3 speakers can be set-up either standing or lying down. Attach
these rubber feet to prevent vibration causing the speakers to move
or fall over.
One sheet of 12 rubber feet is included. Use 3 or 4 feet per speaker.
Attaching to the wall
Rubber feet (included)
Screw (not included)
To attach vertically
To attach horizontally
Attach four rubber feet to each speaker, ensuring they do not cover
the holes.
The surface you attach the speakers to must be able to support over
10 k .
Attaching to speaker stands
Speaker stands (not included)
Plate thickness +7 to 10 mm
Attach the stands with these holes.
Ensure the following conditions are met when you purchase
your speaker stands.
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
Screw; diameter: 5 mm, pitch: 0.8 mm, length: thickness of stand
plate plus between 7 and 10 mm.
Distance between the centers of the holes: 60 mm
The stands must be able to support over 10 k .
The stands must be stable even if the speakers are in a high posi-
tion.
Moving the brand badge
You can rotate the brand badge if you choose to set up the speakers
horizontally.
Rotate the badge to the required position.
Cher client
Nous vous remercions d’avoir arrêté votre choix sur cet appareil.
Pour en tirer un rendement optimal, lire attentivement le présent
manuel.
Chaîne SB-CSS135
Enceintes x 3 SB-AFC135
Vérifier la présence et l’état des pièces et accessoires suivants.
Installation des enceintes
Fixation des pieds de caoutchouc
Les 3 enceintes sont identiques.
Elles peuvent être placées soit à l’horizontale ou à la verticale. Fixer
les pieds de caoutchouc sur les enceintes pour prévenir toute vibra-
tion qui pourrait les faire basculer ou tomber.
Une feuille de 12 pieds est incluse avec les enceintes. Utiliser de 3
à 4 pieds par enceinte.
Installation au mur
Pieds de caoutchouc pour enceintes (fournis)
Vis (vendues séparément)
Fixation verticale
Fixation horizontale
Apposer quatre pieds de caoutchouc à chaque enceinte, en
s’assurant qu’ils ne recouvrent pas les orifices.
La paroi murale doit pouvoir supporter plus de 10 k .
Fixation des enceintes sur un support
Supports (vendus séparément)
Épaisseur du support : 7 à 10 mm
Fixer le support aux orifices à l’arrière de l’enceinte
Vérifier les points suivants avant d’acheter des supports pour
enceintes :
Le diamètre, la longueur des vis ainsi que la distance entre les vis
comme illustré au schéma.
Les vis doivent avoir un diamètre de 5 mm et un pas de 0,8 mm.
La longueur doit comprendre l’épaisseur du support plus 7 à 10 mm.
La distance entre chaque orifice doit être de 60 mm.
Les supports doivent pouvoir supporter plus de 10 k .
Les supports doivent être stables même lorsque les enceintes sont
placées en hauteur.
Déplacement du logotype
Lors d’installation à l’horizontale, le logotype peut être tourné afin
de se trouver dans le même sens que l’installation.
Orienter le logotype selon les besoins.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SBCSS135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SBCSS135 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info