548772
31
Zoom out
Zoom in
Previous page
1/128
Next page
23
3 MANUAL INSTALLATION
DMS-CTC-20101206-0033 v1.0
3.1.1 Setting up your MediaAccess Gateway as DSL
Gateway
Introduction
This section helps you to connect the MediaAccess Gateway to your service provider’s network.
Signal arriving at your home
The Line signal that arrives at your home consists the following components:
A Phone signal carrying the traffic for telephony.
A DSL signal carrying the Internet traffic.
DSL Gateways have a built-in solution to remove the Phone component. No additional devices are needed, you can
connect them directly to the Line.
Telephones do not have this capability, so here you have to use a filter or splitter to remove the DSL signal.
What does a filter/splitter look like
A splitter/filter is a box that typically has the following connectors:
A Line input
This connector must be connected to the input signal that needs to be filtered.
A Phone/PSTN output
This connector offers filtered output signal. It only contains the Vo i c e component and can only be used for connecting
phones.
A Modem/DSL output (optional)
This connector offers unfiltered output. It contains both the Phone and DSL signal and can be used to connect your
MediaAccess Gateway.
Connecting the cables
The procedure to be followed depends on the fact if this filter has been integrated into your MediaAccess Gateway or not.
Check the label of your MediaAccess Gateway. If the product name contains:
“wIF” (for example MediaAccess TG789vn v3 wIF) then your MediaAccess Gateway has an integrated filter. No external
filters are needed. Follow the steps described in “Scenario 2: A MediaAccess Gateway without integrated filter” on page 24.
No “wiF (for example MediaAccess TG789vn v3) then your MediaAccess Gateway does not have an integrated filter.
Follow the steps described in “Scenario 2: A MediaAccess Gateway without integrated filter” on page 24.
This Phone signal is only used for communication over the traditional telephone network (PSTN). Voice over IP
communication will be carried by the DSL signal.
DSL + Voice
Voice
DSL + Voice
Service
Provider
Filter/Splitter
LINE
PHONE
MODEM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technicolor TG789vn v3 - MediaAccess at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technicolor TG789vn v3 - MediaAccess in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technicolor TG789vn v3 - MediaAccess

Technicolor TG789vn v3 - MediaAccess Quick start guide - Dutch - 2 pages

Technicolor TG789vn v3 - MediaAccess User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info