517190
28
Zoom out
Zoom in
Previous page
1/31
Next page
28
11. INSPECTION AND MAINTENANCE BEFORE RIDING
CHECKING THE SPARK PLUG
y Remove the cap of high tension cable. (Use a plug wrench in tool box to
remove the spark plug by turning it counterclockwise.)
y Check the electrode if it is dirty or fouled by carbon deposits.
y Remove the carbon deposits on the electrode with steel wire, and clean
the spark plug with gasoline, then, wipe dry with a rag.
y Check the electrode, and adjust its gap to 0.6~0.7mm. (Check it with a
feeler gauge)
y Hand tight the spark plug as far as it can go and then tighten it another
1/2~3/4 turns with a wrench.
Use only spark plugs suitable for the engine specifications of this
scooter recommended by the manufacturer. (Refer to specifications.)
CHECKING THE AIR CLEANER
DISASSEMBLE PRCEDURE
y Remove the screw of air cleaner cover.
y Remove the air cleaner cover and then the cleaner’s
element.
y Clean or replace the element.
(For checking interval please refer to maintenance
schedule.)
y Refer to figures shown on the right for air cleaner
element cleaning steps.
ASSEMBLE PRCEDURE
y Assemble the air cleaner in reverse order of
disassemble.
Procedures for cleaning air cleaner
element:
1.cleam. 2.squeeze dry.
3.soak in engine oil. 4.squeeze dry
0.6~0.7mm
CAUTION:
y A dirty air filter can reduce horsepower output and increase fuel consumption.
y Change the air filter frequently to prolong the engine’s life.
y If the air cleaner is improperly installed, dust could accumulate in the engine cylinder, which can
reduce horsepower and engine life.
y Be careful not to get the air cleaner wet when washing the scooter.
WARNING:
y The engine is extremely hot after running. Allow scooter to cool before removing the spark plug
to avoid being burned.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sym JET EUROX 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sym JET EUROX 50 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info