762199
1
Zoom out
Zoom in
Previous page
1/2
Next page
EN
SH 100
Instructions
Congratulaons to your new Smart home device, swisstone
SH 100. This Smart Wi-Fi socket makes your standard
electrical outlet to a manageable mul-funconal outlet,
enabling you to easily control any connected device via
an app on your iOS or Android device. It can also be voice
controlled if associated with a home automaon service like
Amazon Echo and Google Home.
1. Install the KAFO app
Download and install the app KAFO from Google Play or App
Store on your smartphone.
Compable devices
Android version 4.1 and later
iOS version 8.0 and later
2.4 GHz Wi-Fi network
2. Register/login on the KAFO APP
When rst opening the KAFO app, select to
Register
a new
account or
Login
if you already have an account.
Note! Be sure to remember the username and
password for later use with Amazon Echo or
Google Home integraon.
3. Add device, Smart Setup Option
Note! Your mobile device
must be connected to the
same Wi-Fi network as your
SH 100 should be connected to.
Please also note that SH 100
only supports 2.4 GHz Wi-Fi
networks.
1. Connect the SH 100 to the
wanted electrical outlet. This
outlet must be within the
Wi-Fi network range. Avoid
placing the SH 100 near
potenal sources of radio
signal interference.
2. In the KAFO app, click
Add Device
or + in the upper right
corner to add this new device.
3. Select the device type
Socket
.
4. Make sure the blue Wi-Fi indicator blinks quickly (2 mes
per second), then click
Conrm indicator rapidly blink
. If
not, press and hold the buon ! for 5 seconds.
5. Select the same Wi-Fi
your phone is connected
to and enter the password
for that Wi-Fi, then click
Next
.
6. When the app and the
device have found each
other, click to rename
the device to a suitable
unique name, e.g. “Living
room”.
Tip: If using your device
with Amazon Alexa or Google Home we recommend
naming the device to something that is easy to say
and for the service to understand.
7. When ready, click
Done
to add the found device to
the device list in the app.
You can also click
Share to family
to share the device
with your family. Enter their KAFO account to share
the device control.
Alternave connecon, AP mode
In some cases you may have trouble connecng the
device with your Wi-Fi when using the Smart Setup
Opon. Use the following steps if you are unable to
connect the device with your Wi-Fi.
1. Connect the SH 100 to the wanted electrical outlet.
2. Press and hold the buon ! for 5 seconds unl it
begins to blink quickly (2 mes per second). The
device is now in Smart Setup mode
3. Press and hold the buon ! again for 3 seconds
unl it begins to blink slowly (once every 3 seconds).
The device is now in AP mode
4. In the KAFO app, click
Add Device
or + in the upper
right corner to add this new device.
5. Select the device type
Socket
.
6. Click
AP mode
in the upper right corner
7. Click
Conrm indicator slowly blink
.
8. The app will begin to scan nearby Wi-Fi networks.
Once the scan is complete it will read
Connected
to SmartLife-XYX
. If not, click
Change Network
and
select
SmartLife-XYX
.
9. Select your Home Wi-Fi Network and enter the
password for that Wi-Fi, then click
Next
.
10. Set name and click
Done
when ready.
Timer
You can create ON/OFF schedules
to automate your plugged-in
devices to work around your
home and work schedules, such
as seng the lights to come on at
dusk and turn o at sunrise.
1. Click
Timer
.
2. Set the mer in hours and
minutes.
3. Set if the mer should occur
Only Once
or the repeated schedule.
4. Set if the switch should go
On
or
O
.
5. Click
Save
when done.
4. Device management
You have now connected your new
device and can start to control the
power to any device connected via
the SH 100.
In the app, click ! to turn the
power on/o.
The display will clearly show the
state of SH 100.
You can also click
Switch
to turn
the power on/o.
You can of course always press the
buon ! on the socket to turn the power on/o.
Appointment
The Appointment can be set to automacally turn o the
device plugged into the SH 100 aer the countdown me has
elapsed.
1. Click
Appointment
.
2. Set the countdown mer in
hours and minutes and click
Conrm
to start the mer.
Home_network
********
Device properes
Click
...
in the upper right corner to view and modify
the device sengs:
Modify Device Name
: to change the device name. If
you for instance move the plug it can be good to have
a matching name.
Device sharing
: to share the device with other KAFO
accounts.
Device info
: detailed information about the device.
Create Group
: group this device with other devices.
Use Echo
: view pairing instructions for Amazon Echo
(Alexa).
Use Google Home
: view pairing instructions for Google
Home.
Send Feedback
: send feedback to the developers
Check for Firmware Update
: for keeping the device
updated with the latest improvements.
Remove Device
: remove the device paring.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swisstone SH 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swisstone SH 100 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Swisstone SH 100

Swisstone SH 100 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info