53171

Sweex IEEE 802.11g Wireless Router Manual

7
Zoom out
Zoom in
Previous page
1/42
Next page
802.11g Wireless Router User’s Manual
6
LED does not light up, then your connection speed is 10Mbps.
Link/ACT Green. The Link /ACT LED also serves two purposes. If the LED is continuously lit, the
Router is successfully connected to a device through the corresponding port. If the LED is
flickering, the Router is actively sending or receiving data over that port.
EWAN LED Indicators:
10/100 Green. The 10/100 LED lights up when the corresponding port is 100Mbps connection. If this
LED does not light up, then your connection speed is 10Mbps.
Link/ACT Green. The Link /ACT LED lights up when a successful connection is made between the
Router and your cable or DSL modem. The
Link/ACT
LED flickers when the Router is
sending or receiving data over the EWAN port.
The Router’s Rear Panel
The rear panel of WF514 contains the port connections listed below.
Viewed from left to right, the rear panel contains the following features:
Four local (LAN) 10/100 Ethernet ports for connecting the Router to the local PCs or hub, switch
Ethernet WAN (EWAN) port for connecting the Router to a Cable or DSL modem
Factory Default Reset push button
DC power connector for connecting through an AC power adapter (included as part of the product) to
the wall power outlet
Wireless antenna connector
The Hardware Reset Button
The Reset button can be used in one of two ways:
1. Reboot the Router while keeping all of its settings.
If the Router is having problems connecting to the Internet, press the Reset button for just a moment
with a paper clip or a pencil tip. This clears up any jammed connections.
2. Restore the Router’s factory defaults and clear all of its settings, including a new password or wireless
settings.
If you are experiencing extreme problems with the Router and have tried all other troubleshooting
measures, press the Reset button and hold it down for 10 seconds.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sweex IEEE 802.11g Wireless Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sweex IEEE 802.11g Wireless Router in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info