635679
4
Zoom out
Zoom in
Previous page
1/8
Next page
444
Mounting the PIR Alarm Unit
Mounting
To mount the PIR alarm unit, you’ll need the following tools:
A screwdriver•
A drill (for hardwood or masonry)•
The alarm unit should be mounted between 5ft/1.8m and 7ft/2.6m high, and be
angled a few degrees towards the ground (see the coverage diagram, below). Of
course, your situation is unique, and you may need to alter the height and angle
of the sensor to meet your particular needs (such as looking up a flight of stairs).
To mount the alarm unit:
First, attach the mounting bracket to a wall or ceiling, using the supplied screws. 1.
If mounting on hardwood, you may need to drill guide holes. If mounting onto
masonry (brick, concrete and so on) you’ll need a drill with a masonry drill bit,
and use the wall plugs included with the alarm unit.
Then, simply insert the locking tabs on the mounting bracket into the grooves 2.
on the back of the sensor. Move the alarm unit down to lock it into place.
Angle the PIR sensor aiming slightly downwards (see the Detection Area 3.
diagram on page 5 for more information).
1. 2. 3.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SW351-KCH Keypad PIR Alarm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SW351-KCH Keypad PIR Alarm in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info