453444
13
Zoom out
Zoom in
Previous page
1/17
Next page
FUEL AND LUBRICATION SYSTEM 5-13
AIR
MIXTURE
FUEL
STARTER (ENRICHER) SYSTEM
Pulling the starter (enricher) plunger 1 causes fuel to be drawn into the starter circuit from the float chamber
2.
The starter jet 3 meters this fuel. The fuel then flows into the fuel pipe 4 and mixes with the air coming from
the float chamber 2. The mixture, rich in fuel, reaches starter plunger 1 and mixes again with the air coming
through starter air jet 6 from the diaphragm chamber.
The three successive mixings of the fuel with the air provided the proper fuel/air mixture for starting. This
occurs when the mixture is sprayed through the starter outlet port 5 into the main bore.
NOTE:
A starter (enricher) system is operated almost the same way as a choke.
FLOAT SYSTEM
The float 1 and needle valve 2 work in conjunction with one
another. As the float 1 moves up and down, so does the needle
valve 2.
When there is a high fuel level in float chamber 3, the float 1
rises and the needle valve 2 pushes up against the valve seat.
When this occurs, no fuel enters the float chamber 3.
As the fuel level falls, the float 1 lowers and the needle valve 2
unseats itself; admitting fuel into the float chamber 3.
In this manner, the needle valve 2 admits and shuts off fuel to
maintain the appropriate fuel level inside the float chamber 3.
FUEL
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suzuki VL 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suzuki VL 800 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suzuki VL 800

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 12 pages

Suzuki VL 800 User Manual - English - 6 pages

Suzuki VL 800 User Manual - English - 19 pages

Suzuki VL 800 User Manual - English - 14 pages

Suzuki VL 800 User Manual - English - 20 pages

Suzuki VL 800 User Manual - English - 15 pages

Suzuki VL 800 User Manual - English - 11 pages

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - German - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info