453444
1
Zoom out
Zoom in
Previous page
1/11
Next page
5-18 FUEL AND LUBRICATION SYSTEM
Drill-stop
Pilot
screw
Plug
Carburetor
body
Use a % size drill bit with a drill-stop to remove the pilot screw
plug. Set the drill-stop 6 mm from the end of the bit to prevent
drilling into the pilot screw. Carefully drill through the plug.
Thread a self-tapping sheet metal screw into the plug. Pull on
the screw head with pliers to remove the plug. Carefully clean
any metal shavings from the area. (For E-03, 28, 33)
#
Replace the plug with a new one.
Slowly turn the pilot screw 1 in clockwise and count the num-
ber of turns until the screw is lightly seated. Make a note of how
many turns were made so the screw can be reset correctly
after cleaning.
Remove the pilot screw 1 with the spring 2, washer 3, and
O-ring 4.
Remove the funnel 5.
Remove the pilot air jets 6.
#
Do not use a wire for cleaning the passage and jets.
A-PDF Split DEMO : Purchase from www.A-PDF.com to remove the watermark
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suzuki VL 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suzuki VL 800 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suzuki VL 800

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 10 pages

Suzuki VL 800 User Manual - English - 12 pages

Suzuki VL 800 User Manual - English - 6 pages

Suzuki VL 800 User Manual - English - 19 pages

Suzuki VL 800 User Manual - English - 14 pages

Suzuki VL 800 User Manual - English - 20 pages

Suzuki VL 800 User Manual - English - 15 pages

Suzuki VL 800 User Manual - English - 17 pages

Suzuki VL 800 User Manual - English - 23 pages

Suzuki VL 800 User Manual - German - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info