542552
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
2. Turn the Foot POD on. Place the POD upside down (i.e. battery compartment
cover facing up) in order to put the POD into pairing mode.
3. Your Suunto t3 or t4 will display “
Paired” or, if pairing failed, it returns to the
Pair a POD menu.
Your Suunto t6 will display either ‘”PAIRING COMPLETE” or, if pairing failed,
NO DEVICES FOUND” within 30 seconds.
If pairing fails, make sure that there are no active ANT transmitters such as HR
belts nearby and repeat steps 1 and 2.
After successful pairing, your heart rate monitor will display a new mode called
Speed/Distance. There you can view all the Speed and distance-related
information while you are on the move.
If you would like to use the Suunto t6 (serial number 50499999 or lower)
simultaneously with both the Bike POD and the Foot POD, Suunto offers a free
update of your Suunto t6. Please send your Suunto t6 and the Foot POD proof
of purchase to your nearest Suunto Service Center and you will be provided
with an update of your Suunto t6. Please remember to pay the postal costs.
For information on Suunto Service Center locations visit www.suunto.com.
4. USING YOUR FOOT POD
4.1. CONNECTION
To use your Foot POD, you must establish a connection between it and your
heart rate monitor each time you want to use your heart rate monitor with your
Foot POD.
1. Turn the Foot POD on by taking few strides.
2. In your Suunto t3 or Suunto t4, enter Training mode or start the stopwatch.
In your Suunto t6, select Connect in the Speed/Distance menu.
Your heart rate monitor informs you when the Foot POD has been found.
Suunto t3 or Suunto t4: If the connection fails, the message “Searching”
disappears from the bottom row of the display and the selected shortcut returns.
Suunto t6: If the connection fails, ”NO DEVICES FOUND” is displayed on the
screen.
In this case, make sure that the Foot POD is active and try again. If the
connection still does not work, remove and reinstall the battery. If the red LED
blinks 3 times after reinstalling the battery, the connection is working. If the red
LED displays 6 quick blinks, you should change the battery. See Section 4.3.
“Replacing the battery”.
If the red LED burns continuously, the pod may require service.
4.2. CALIBRATION
To ensure that your measurements are accurate, you must first calibrate the
Foot POD using your heart rate monitor. Perform the calibration on an
accurately measured course, for instance on a 400m running track.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suunto FOOT POD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suunto FOOT POD in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suunto FOOT POD

Suunto FOOT POD User Manual - German - 9 pages

Suunto FOOT POD User Manual - Dutch - 9 pages

Suunto FOOT POD User Manual - Spanish - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info