542552
3
Zoom out
Zoom in
Previous page
1/8
Next page
3
1. INTRODUCTION
Suunto Foot POD is an accessory for your Suunto t3, Suunto t4 or Suunto
t6 heart rate monitor. It is a light-weight, wireless speed and distance
sensor suitable for activities where footsteps are taken in an even stride,
such as running, jogging or walking.
It measures speed and distance by tracking and recreating the motion of the
foot in the air. Unlike conventional pedometers, it measures each stride
individually. Therefore, it displays the correct speed and distance information
even when you vary your stride length, for example, when running uphill or
downhill.
Unlike the GPS, the Suunto Foot POD functions both outdoors and indoors
because it measures the stride length with built-in acceleration sensors.
It is firmly attached to your shoe laces with an easy-to-use clip ensuring that it
does not become loose even when running in demanding conditions.
When paired with your Suunto t3, t4 or t6 heart rate monitor and properly
calibrated, Suunto Foot POD measures your distance and speed information
accurately and effortlessly.
NOTE: Suunto Foot POD does not get an accurate reading with activities
involving fast acceleration, turns, jumps, side steps and abrupt halts, for
example, racquet sports.
NOTE: The heart rate monitor functions related to the use of your Suunto Foot
POD are explained in the individual Suunto t3, t4 and t6 instruction manuals.
You can download the latest versions of the manuals at www.suunto.com/
training.
2. ATTACHING THE FOOT POD
Attach the Foot POD to the laces of your running shoes as follows:
1. Remove the POD from the clip.
2. Attach the clip by sliding it under the laces.
3. Tighten the laces.
4. Attach the POD to the clip. (To ensure accurate measurement, make sure the
device is not tilted to left or right and cannot move around.) .
To remove the Foot POD from your shoe, press down firmly on the front tips of
the clip one after the other to disengage the POD. Loosen the shoe laces and
remove the clip.
3. BEFORE USE
3.1. ACTIVATING AND DEACTIVATING THE FOOT POD
The Foot POD reacts to motion. It turns on automatically by, for example,
stumping or striding. This is indicated by 3 blinks of the red LED.
The Foot POD turns off automatically after being inactive for 30 minutes. This is
indicated by 2 blinks of the red LED.
3.2. PAIRING YOUR FOOT POD
Before you can use your Suunto Foot POD, you have to pair it with your Suunto
heart rate monitor. This is only necessary when you use your Foot POD for the
first time.
To pair your Foot POD with your Suunto heart rate monitor:
1. In your Suunto t3 or Suunto t4, go to Training mode settings and select Pair
a POD and then Foot. Then, press the Mode button. The message ‘TURN ON
FOOT’ is displayed.
In your Suunto t6, go to the Training menu and select Pair and then Foot
POD (if your device has a serial number 50500000 or higher) or Spd sens (if
your device has a serial number 50499999 or lower). The messageTURN ON
NEW DEVICE’ is displayed.
EN
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suunto FOOT POD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suunto FOOT POD in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suunto FOOT POD

Suunto FOOT POD User Manual - German - 9 pages

Suunto FOOT POD User Manual - Dutch - 9 pages

Suunto FOOT POD User Manual - Spanish - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info