533277

Support plus URC-L-1870 Manual

16
Zoom out
Zoom in
Previous page
1/61
Next page
……………………………………………………………………………………………………
16
You can set up a Macro operation by following steps:
1. Press and hold the
key for more than 3 seconds, and then release it.
2. Press the
or key to select “MACRO”, and then press the key.
3. Press the or key to select the “MACR O1” (or Macro2 or Macro3),
then press the
key.
4. The screen shows “SETUP ”, and then press the
key.
5. LCD shows “SELECT KEY”, then you can select the device and function key for a
sequent operation that you like.
e.g.: TV+POWER+MUTE+AV, +DVD+PLAY, +VCR+RECORD, etc. That means you want to
turn on the TV and shut off its sound, switch TV input to AV port, at the same time DVD starts
to play, VCR begins to record
6.Press the
key to save the setting, LCD shows “SUCCESS” then exit to current
setup state,
7.You can press any device key to finish set up or press the
key to last state and
use or to select other set up.
SET 3S
Input sequent operation, then press OK
Remark:
1. A new Macro set up will erase and cover the last programmed Macro.
2.You can set up to maximum 10 commands in a Macro.
3. During operating Macro, be sure point your remote control to your appliance until
finish this operation.
4..Be sure all the keys included in MACRO can send out signals, otherwise even if
you programmed these keys inside the MACRO, it still can’t work properly when
you operate this function. You can check those keys by pressing them to see the
relative Device buttons flash or not before you set up into MACRO.
5. Be sure the device must have relative conditions when you operate MACRO
function. For example the disc must be put in the DVD player and a video tape
must be put in the VCR when you like to play the DVD or make a record by your
VCR by Macro operation.
T V 0 1 0
1 1 : 4 5 A M
M A C R O
C O D E S E T U P
S E T U P
M A C R O 1
S E L E C T K E Y
S U C C E S S
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Support plus URC-L-1870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Support plus URC-L-1870 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info