Manual Support plus URC-L-1870 (page 15 of 61) (English)

533277

Zoom out

Zoom in

1/61

……………………………………………………………………………………………………

key.

4 Press the

or key to adjust contrast level, then press the key until you

satisfied.

5 Press the

key to save the setting and the LCD shows SUCCESS then

“CONTRAST” exit to current setup state. You can press any device key to finish

set up or press the

key to last state, or you can use or to

select other set up.

F. ALL OFF

You can turn off or turn on all devices by one button only and sometimes it’s

convenient .

Press and hold the

key about 1 second and then release it. The remote control

will send out each power signal for each device key to turn on (or turn off) your

appliance one by one. Meanwhile the device key on remote control flashes to tell you

which power signal is been sending.

Remark: The remote control must be pointed to device that you like to control until the

operation finished.

G. Show View

Show view function scans all TV or CAB/SAT channels for your quick view.

1. Press the device key to select the device (such as

) that you want to operate.

2. Press and hold the SHOWVIEW key about 1 second. When the device’s LED

flashes and it goes into Show View mode. The remote control automatically scans

all channels for a brief view.

Remark: 1. The remote control must be pointed at the device until Show View

operation finished.

2. If you want to exit the show view mode, please press any key during

operation.

H. Macro

Macro function lets you make sequent operation for your home theater. URC20-F15D

can has total 3 Macro operations.

Press and hold the MACRO key and

key (or 2, 3 key) simultaneously, then

release them, the remote control will send out a sequent IR commands that you

programmed before. Meanwhile the device LED will flash to tell you which button

command is sending.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Support plus URC-L-1870 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Support plus URC-L-1870 Manual

Product: