654217

Sunbeam MX9500 Planetary Mixmaster Manual

16
Zoom out
Zoom in
Previous page
1/52
Next page
14
Troubleshooting Guide
Problem Possible Cause What to do
Motor will not start. Motor is over-heated.
Mixer head is not
locked down properly.
Unplug and allow motor to cool, (the mixer head
should be cool to touch).
Move mixture in mixing bowl to the side of the
attachment, to allow the attachment to go all the
way into the bowl.
Motor is over-heated. Use of a high speed
for a long time.
Mixture too heavy.
Mixing quantity too
large.
Unplug and allow motor to cool, (the mixer head
should be cool to touch).
Try mixing in batches.
Mixer head does not
lock down properly.
Thick mixture is
preventing the
attachment from
going all the way
down into the bowl.
Move mixture in mixing bowl to the side of the
attachment, to allow the attachment to go all the
way into the bowl.
Attachment is
hitting the bowl.
Attachment is not
inserted correctly.
Mixing bowl is not
locked into the base
properly.
Remove the attachment and try inserting again.
Refer to the instructions in this booklet if needed.
Lock bowl into position. Refer to the instructions
in this booklet if needed.
Mixer is moving on
the benchtop.
Chosen speed is too
high for the mixture.
Mixture caught up in
the attachment.
Flour or spills on
bench top.
Lower the speed or mix in batches.
Scrape down the attachment and continue mixing.
Clean and dry benchtop as well as the mixer base.
Cannot use or set
the timer, but the
motor will start when
the speed dial is
being turned.
‘+’ button, ‘-‘ button
or Pause/Start button
was depressed when
the unit was switched
on.
Unplug from the power outlet for 5-10 seconds,
then plug in again ensuring no buttons are
pressed.
If this problem persists, there may be food
particles or liquid in the switch. The unit is
safe to use in this mode, however Sunbeam
recommends to take the product to an authorised
service centre. For a complete list of Sunbeam’s
authorised service centres visit our website www.
sunbeam.com.au or www.sunbeam.co.nz
or call: Australia: 1300 881 861
New Zealand: 0800 786 232
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam MX9500 Planetary Mixmaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam MX9500 Planetary Mixmaster in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info