Manual Steinel NightMatic 2000 (page 4 of 40) (All languages)

592546

Zoom out

Zoom in

1/40

6 7

The system can be put into

operation after connecting

the photo-cell controller

and securing it in place.

Light-level setting:

Inside the unit, the chosen

sensor response threshold

is infinitely adjustable from

approx. 2–10 lux.

Dimensions: (H x W x D) 99 x 74 x 37 mm

Power supply: 230-240 V/50 Hz

Switching capacity:

Incandescent lamps, 1000 W max. at 230 V AC

Fluorescent lamp, 500 W max., at cos ϕ = 0.5,

inductive load at 230 V AC

4 x 58 W max., C ≤ 88 µF

at 230 V AC

)

Photo-cell controller

response threshold: adjustable from 2–10 lux

Intrinsic power consumption < 0.8 W

Protection class: IP 54

*1)

Fluorescent lamps, low-energy lamps, LED lights with electronic ballast

(total capacity of all ballasts connected below the level stated).

Operation/Function

Technical Specifications

Connect the live conductor

(L) and neutral conductor

(N) to the terminal pro-

vided. Connect the load

supply conductor (light)

to the second neutral

conductor terminal (N)

and phase (L').

Connect any green/yellow

protective earth conductor

to the terminal provided.

Important: Getting the

cable connections crossed

will produce a short circuit

in the unit or in your fuse

box. In this case, you

must check the identifica-

tion of all cables and re-

connect them.

Troubleshooting

Malfunction Cause Remedy

NightMatic 2000

without power

■ Fuse has blown; not

switched ON; break in

wiring

■ Short circuit

■ Fit new fuse; switch ON

mains switch. Check

wiring with voltage tester

■ Check connections

NightMatic 2000

not switching ON

■ Bulb faulty

■

Mains switch OFF

■ Fuse blown

■ Replace light bulb

■ Switch ON

■ Replace fuse, check

connection if necessary

NightMatic 2000 keeps

switching ON/OFF

■ Light from the luminaire

is interfering with the

photo-cell controller

■ Increase light-level

thresh-old at setscrew

Functional Warranty

This STEINEL product has

been manufactured with

utmost care, tested for

proper operation and

safety and then subjected

to random sample inspec-

tion. Steinel guarantees

that it is in perfect condi-

tion and proper working or-

der. The warranty period is

36 months and starts on

the date of sale to the con-

sumer. We will remedy

defacts caused by material

flaws or manufacturing

faults. The warranty will be

met by repair or replace-

ment of defective parts at

our own discretion. The

warranty does not cover

damage to wear parts, nor

does it cover damage or

defects caused by impro-

per treatment, mainten-

ance or the use on

non-genuine parts. Fur-

ther consequential damage

to other objects shall be

excluded.

Claims under the warranty

will only be accepted if the

unit is sent fully assembled

and well-packed with a

brief description of the

fault, a receipt or invoice

(date of purchase and

dealer's stamp) to the ap-

propriate Service Centre.

Repair service:

If defects occur outside

the warranty period or are

not covered by warranty,

ask your nearest service

station for the possibility

of repair.

Declaration of Conformity

This product complies with

- Low-Voltage Directive 2006/95/EC

- EMC Directive 2004/108/EC

- WEEE Directive 2012/19/EC

Is there any way of adjusting the Steinel NightMatic 2000 to turn off after a fixed period of time, please? Submitted on 3-8-2021 at 08:34
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steinel NightMatic 2000 in the language / languages: All languages as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steinel NightMatic 2000 Manual

Product: