Manual Steinel HG 2220 E (page 7 of 8) (All languages)

593373

Zoom out

Zoom in

1/8

- 12 - - 13 -

Technical Speciﬁcations

220-230 V, 50/60 Hz

2200 W

1 2

150-300 l/min 300-500 l/min

80-630 °C 80-630 °C

At thumbwheel in 9 steps

Yes

≤ 70dB (A)

≤ 2.5 m/s

/ K = 0.08 m/s

0.610 kg

Voltage

Output

Stage

Airﬂow rate

Temperature

Temperature setting

Protection class

(without earth terminal)

Thermal cut-out

Emission sound pressure level

Total vibration value

Weight without power cord

HG 2220 E

Subject to technical modiﬁcations

Applications

Settings

Airﬂow rate stage 1 low airﬂow rate Airﬂow rate stage 2 high airﬂow rate

Temperature approx. Temperature approx.

Thumbwheel

HG 2220 E HG 2420 E HG 2220 E HG 2420 E

1 80 °C 80 °C 80 °C 80 °C

2 110 °C 140 °C 110 °C 140 °C

3 190 °C 220 °C 180 °C 220 °C

4 280 °C 300 °C 260 °C 300 °C

5 360 °C 360 °C 340 °C 360 °C

6 440 °C 440 °C 420 °C 440 °C

7 500 °C 500 °C 480 °C 500 °C

8 570 °C 570 °C 560 °C 560 °C

9 630 °C 650 °C max. 630 °C 650 °C max.

Depending on how accurately the thumbwheel is set, the guide values shown may differ by up to +/- 20 °C from the

temperature actually delivered.

HG 2220 E / HG 2420 E

- Welding all thermoplastics.

- Welding ﬁlms and tarpaulins.

- Welding plastics and jointing.

- Activating and removing glues and hot-melt adhesives.

- Thawing frozen door locks, frozen water pipes, icy steps.

- Heating car-wrapping ﬁlms.

- Applying edgebands.

- Shaping thermoplastics.

220-230 V, 50/60 Hz

2200 W

1 2

150-400 l/min 200-400 l/min

80-650 °C 80-650 °C

At thumbwheel in 9 steps

Yes

≤ 70dB (A)

≤ 2.5 m/s

/ K = 0.08 m/s

0.610 kg

HG 2420 E

Here are some of the applications you can use STEINEL hot

air tools for. This selection is by no means exhaustive – no

doubt you can immediately think of other examples.

Material

Rigid PVC

Rigid PE

(HDPE)

Polyethylene

Polypropylene

ABS

Applications

Pipes, ﬁttings, tiles, structural sections,

technical mouldings

300 °C welding temperature

Tubs, baskets, canisters,

insulating material, piping

300 °C welding temperature

High-temperature drainpipes, seat buckets,

packagings, automotive parts

250 °C welding temperature

Automotive parts, equipment enclosures, cases

350 °C welding temperature

Characteristic signs

Chars when held in ﬂame,

pungent odour;

crashing sound

Light yellow ﬂame, drips continue to burn,

smells of a candle being extinguished;

crashing sound

Bright ﬂame with a blue core,

drips continue to burn, pungent odour;

crashing sound

Black, ﬂuffy smoke;

sweet odour;

crashing sound

Guide for selecting the right type of welding rod for welding plastics

Accessories (see illustrations on the inside cover)

HG 2220 E

1 Surface nozzle 50 mm Prod. No. 070113

2 Surface nozzle 75 mm Prod. No. 070212

3 Window nozzle 50 mm Prod. No. 070311

4 Window nozzle 75 mm Prod. No. 070410

5 Paint scraper kit Prod. No. 010317

6 Reﬂector nozzle Prod. No. 070519

7 Crimp connectors

Ø 0.5-1.5 Prod. No. 006655

Ø 1.5-2.5 Prod. No. 006648

Ø 0.1-0.5 – Ø 4.0-6.0 Prod. No. 006662

8 Shrink tubings

4.8-9.5 mm Prod. No. 071417

1.6-4.8 mm Prod. No. 071318

4.0-12.0 mm Prod. No. 072766

Shrink tubing set, 3-part Prod. No. 075811

9 Soldering reﬂector nozzle Prod. No. 074616

10 Reduction nozzle 14 mm Prod. No. 070717

11 Reduction nozzle 9 mm Prod. No. 070618

12 Wide-slit nozzle Prod. No. 074715

13 Feed roller Prod. No. 006785

14 Plastic welding rod

Rigid PVC: Prod. No. 073114

HDPE: Prod. No 071219

PP: Prod. No. 073411

ABS: Prod. No. 074210

15 Welding nozzle Prod. No. 070915

Functional Warranty

This STEINEL product has been manufactured with utmost

care, tested for proper operation and safety and then sub

jected to random sample inspection. STEINEL guarantees

that it is in perfect condition and proper working order.

HG 2220 E is guaranteed for 12 months or 750 hours of

operation and HG 2420 E for 12 months or 1000 hours of

operation, each commencing on the date of sale to the con

sumer. We will remedy defects caused by material ﬂaws or

manufacturing faults. The warranty will be met by repair or

replacement of defective parts at our own discretion. This

guarantee does not cover damage to wearing parts, dam

age or defects caused by improper treatment or mainte-

nance nor does it cover breakage as a result of the product

being dropped. Further consequential damage to other ob

jects shall be excluded.

Claims under warranty shall only be accepted if the product

is sent fully assembled and well packed complete with sales

receipt or invoice (date of purchase and dealer's stamp) to

the appropriate Service Centre or handed in to the dealer

within the ﬁrst 6 months.

Repair service:

If defects occur outside the warranty pe

riod or are not covered by warranty, ask

your nearest service station for the possi

bility of repair.

Your retailer has a wide range of accessories for you to

choose from.

HG 2420 E

1 Round nozzle, 5 mm Prod. No. 092214

2 Round nozzle, 10 mm Prod. No. 092313

3 Flat angled nozzle, 20x2 mm Prod. No. 092115

4 Flat angled nozzle, 40x2 mm Prod. No. 092016

5 Welding nozzle Prod. No. 075316

6 Weld slide Prod. No. 093013

7 Feed roller Prod. No. 093211

8 Jointing plane Prod. No. 093112

9 Quarter-moon knife Prod. No. 092917

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steinel HG 2220 E in the language / languages: All languages as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steinel HG 2220 E Manual

Product: