720574
15
Zoom out
Zoom in
Previous page
1/93
Next page
15
10. Troubleshooting
Problem Possible Cause Fault Correction
Engine does not
start
Too little petrol in the tank Fill with petrol
Incorrect starting sequence Follow the instructions for starting
the engine (see ”operation“)
Spark plug connector ( 12)
not put on correctly
Sooted spark plug
Attach the spark plug connector
Clean, adjust or replace the spark
plug (see “cleaning and maintenance“)
Incorrectly adjusted carburettor
mix
Have the carburettor adjusted by a
specialist workshop
Engine starts but
equipment does
not run at full
power
Dirty air filter ( 14) Replace the air filter (see “cleaning
and maintenance“)
Incorrectly adjusted carburettor
mix
Have the carburettor adjusted by a
specialist workshop
Engine splutters,
stops
Incorrectly adjusted carburettor
mix
Have the carburettor adjusted by a
specialist workshop
Sooted spark plug ( 12) Clean, adjust or replace the spark
plugs (see “cleaning and maintenance“)
Engine overheats Ventilation slot blocked Clean the ventilation slot
Incorrect spark plug (12) Change the spark plug
Too little engine oil in the engine Fill with engine oil
Drive does not
switch on
Bowden cables ( 4) misadjusted Have adjustment carried out by a
specialist workshop
Output unsatisfactory
or engine
labouring
Grass too short or too long Change the cutting height (see
“setting the cutting height“)
Blade blunt Have the blade sharpened or replaced
by a specialist workshop
Blade blocked with grass,
grass collection box full, ejection
channel blocked
Remove the grass (see “cleaning
and maintenance“)
Blade does not
turn
Blade blocked with grass Remove the grass
Blade not installed correctly Have the blade installed by a specialist
workshop
Abnormal noises,
rattling or vibrations
Blade not installed correctly Have the blade installed by a specialist
workshop
Blade damaged
G
B
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SLM-196-510-SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SLM-196-510-SP in the language / languages: English, German, Danish, Italian, Portuguese, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info