622599
4
Zoom out
Zoom in
Previous page
1/100
Next page
4
ENGLISH
(Original instructions)
Intended use
Your Stanley Fat Max Chop Saw has been designed for the
cutting of variously shaped steel materials. This tool is
intended for professional and private, non professional users..
Safety instructions
General power tool safety warnings
@
Warning! When using power tools, always
observe the safety regulations applicable in your
country to reduce the risk of re, electric shock
and personal injury.
u Read all of this manual carefully before using the
appliance.
u The intended use is described in this manual. The use of
any accessory or attachment or the performance of any
operation with this appliance other than those
recommended in this instruction manual may present a
risk of personal injury.
u Retain this manual for future reference.
1. Keep work area clean
Cluttered areas and benches can cause accidents.
2. Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or
wet conditions. Keep the work area well lit (250 - 300 Lux). Do
not use the tool where there is a risk of causing re or
explosion, e.g. in the presence of ammable liquids and
gases.
3. Guard against electric shock
Prevent body contact with earthed surfaces (e.g. pipes,
radiators, cookers and refrigerators). When using the tool
under extreme conditions (e.g. high humidity, when metal
swarf is being produced, etc.), electric safety can be further
improved by using a highsensitivity 30 mA Residual Current
Device (RCD).
4. Keep other persons away
Do not let persons, especially children, not involved in the
work touch the tool or the extension cord and keep them away
from the work area.
5. Store idle tools
When not in use, tools must be stored in a dry place and
locked up securely, out of reach of children.
6. Do not force the tool
It will do the job better and safer at the rate for which it was
intended.
7. Use the right tool
Do not force small tools to do the job of a heavy duty tool. Do
not use tools for purposes not intended; for example do not
use circular saws to cut tree limbs or logs.
8. Dress properly
Do not wear loose clothing or jewellery, as these can be
caught in moving parts. Wear protective hair covering to keep
long hair out of the way. When working outdoors, preferably
wear suitable gloves and non-slip footwear.
9. Use protective equipment
Always use safety glasses. Use a face or dust mask whenever
the operations may produce dust or ying particles. If these
particles might be considerably hot, also wear a heat-resistant
apron. Wear ear protection at all times. Wear a safety helmet
at all times.
10. Connect dust extraction equipment
If devices are provided for the connection of dust extraction
and collection facilities, ensure that these are connected and
properly used.
11. Do not abuse cord
Never carry the tool by its cord. Never pull the cord to
disconnect from the socket. Keep the cord away from heat, oil
and sharp edges.
12. Secure workpiece
Use clamps or a vice to hold the workpiece. It is safer and it
frees both hands to operate the tool.
13. Do not overreach
Keep proper footing and balance at all times.
14. Maintain tools with care
Keep cutting tools sharp and clean for better and safer
performance. Follow instruction for lubricating and changing
accessories. Inspect tool cords periodically and if damaged
have them repaired by an authorized service facility. Inspect
extension cords periodically and replace if damaged. Keep
handles dry, clean and free from oil and grease.
15. Disconnect tool
Switch off and wait for the tool to come to a complete standstill
before leaving it unattended. Unplug the tool when not in use,
before changing any parts of the tools, accessories or
attachments and before servicing.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FME700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FME700 in the language / languages: All languages as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info