Manual Stanley FMCL001B (page 4 of 31) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

720652

Zoom out

Zoom in

1/31

(Übersetzung der ursprünglichen Anweisungen)

DEUTSCH

ENGLISH

(Original instructions)

(Übersetzung der ursprünglichen

Anweisungen)

DEUTSCH

u Move charger and battery pack to a location where the

surrounding air temperature is approximately 65°F

- 75°F (18°- 24°C).

u If charging problems persist, take the tool, battery pack

and charger to your local service center.

u The battery pack should be recharged when it fails to

produce sufcient power on jobs which were easily done

previously. DO NOT CONTINUE to use under these

conditions. Follow the charging procedure. You may also

charge a partially used pack whenever you desire with no

adverse affect on the battery pack.

u Foreign materials of a conductive nature such as, but

not limited to, steel wool, aluminium foil, or any buildup

of metallic particles should be kept away from charger

cavities. Always unplug the charger from the power supply

when there is no battery pack in the cavity. Unplug charger

before attempting to clean.

u Do not freeze or immerse charger in water or any other

liquid.

Warning! Do not allow any liquid to get inside charger. Never

attempt to open the battery pack for any reason.

If the plastic housing of the battery pack breaks or cracks,

return to a service center for recycling.

Charger Diagnostics (Fig.B)

Refer to the indicators in gure B for the charge status of the

battery pack.

Bad Battery

If you see a bad battery blink pattern, do not continue

to charge this battery. Return it to a service center or a

collection site for recycling.

Hot/Cold Pack Delay

When the charger detects a battery pack that is too hot

or too cold, it automatically starts a Hot/Cold Pack Delay,

suspending charging until the battery pack has reached an

appropriate temperature. The charger then automatically

switches to the pack charging mode. This feature ensures

maximum battery pack life. A cold battery pack will charge at a

slower rate than a warm battery pack. The pack will charge at

that slower rate throughout the entire charging cycle and will

not return to maximum charge rate even if the pack warms.

Fitting and removing the battery

(g. C, D)

u To t the battery, line it up with the receptacle on the tool.

Slide the battery into the receptacle and push down until

the battery snaps into place, as shown in gure C.

u To remove the battery, push the release button (4a) while

at the same time pulling the battery out of the receptacle,

as shown in gure D.

Use

Warning! Let the tool work at its own pace. Do not overload.

Switching on and off

u To switch the torch on press in the switch (1)

u To switch the torch off press in the switch (1)

The pivoting lens (g. E, F)

u For your convienience, the lens can be pivoted into a

range of positions.

u Turn the pivoting LED wheel (3) anti clockwise and posi-

tion the Llens (2) as required.

Maintenance

Your Stanley FatMax tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

u Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth.

u Do not use any abrasive or solvent-based cleaner.

u Regularly open the chuck and tap it to remove any dust

from the interior.

Protecting the environment

Separate collection. Products and batteries

marked with this symbol must not be disposed of

with normal household waste..

Products and batteries contain materials that can be recov-

ered or recycled reducing the demand for raw materials.

Please recycle electrical products and batteries according to

local provisions. Further information is available at

www.2helpU.com

Technical data

FMCL001B

Voltage 18V

Lumens 650 / 1900

Battery FMC689L FMC687L FMC688L

Voltage V

18 18 18

Capacity Ah 1.5 2.0 4.0

Type Lithium-Ion Lithium-Ion Lithium-Ion

Verwendungszweck

Ihre Stanley FatMax™ Arbeitsleuchte FMCL001B wurde für

Beleuchtungszwecke entwickelt und sollte nur zur Notbeleuch-

tung genutzt werden. Dieses Gerät ist zum gewerblichen und

privaten Einsatz vorgesehen.

Warnung! Diese Lampe eignet sich nicht für Beleuchtung

ganzer Zimmer.

Sicherheitshinweise

Allgemeine Sicherheitswarnungen für das Gerät

Warnung! Lesen Sie alle Sicherheitswarnhin-

weise und alle Anweisungen. Die Nichteinhal-

tung der folgenden Warnungen und Anweisun-

gen kann einen elektrischen Schlag, Brand und/

oder schwere Verletzungen verursachen.

Bewahren Sie alle Sicherheitswarnungen und

Anweisungen gut auf. Der nachfolgend verwendete Begriff

„Gerät“ bezieht sich auf netzbetriebene Geräte (mit Netzkabel)

und auf akkubetriebene Geräte (ohne Netzkabel).

Charger 905998** typ.1 906086** typ.1

Input voltage V

230 230

Output voltage V

18 18

Current A 1 1

Approx. charge time 90 - 240 min 45 - 120 min

Guarantee

Stanley Fat Max is confident of the quality of its products and

offers consumers a 12 month guarantee from the date

of purchase. This guarantee is in addition to and in no way

prejudices your statutory rights. The guarantee is valid within

the territories of the Member States of the European Union

and the European Free Trade Area.

To claim on the guarantee, the claim must be in accordance

with Stanley Fat Max Terms and Conditions and you will need

to submit proof of purchase to the seller or an authorised

repair agent.

Terms and conditions of the Stanley Fat Max 1 year guarantee

and the location of your nearest authorised repair agent

can be obtained on the Internet at www.2helpU.com, or by

contacting your local Stanley Fat Max office at the address

indicated in this manual.

Please visit our website www.stanley.eu/3 to register

your new Stanley Fat Max product and receive updates on

new products and special offers.

1. Sicherheit im Arbeitsbereich

a. Halten Sie Ihren Arbeitsbereich sauber und gut

ausgeleuchtet. Unaufgeräumte oder dunkle Bereiche

begünstigen Unfälle.

b. Betreiben Sie das Gerät nicht in Umgebungen, in

denen Explosionsgefahr z. B. aufgrund von

brennbaren Flüssigkeiten, Gasen oder Staub besteht.

Geräte erzeugen Funken, die den Staub oder die Dämpfe

entzünden können.

c. Halten Sie Kinder und andere Personen während der

Benutzung eines Geräts fern. Bei Ablenkung können Sie

die Kontrolle verlieren.

2. Elektrische Sicherheit

a. Der Netzstecker des Geräts muss in die Steckdose

passen. Ändern Sie niemals den Stecker in

irgendeiner Form. Verwenden Sie keinerlei

Adapterstecker an geerdeten Elektrogeräten.

Unveränderte Stecker und passende Steckdosen mindern

die Gefahr eines elektrischen Schlages.

b. Vermeiden Sie Körperkontakt mit geerdeten

Oberächen von Rohren, Heizungen, Herden und

Kühlschränken. Es besteht eine erhöhte Gefahr für einen

elektrischen Schlag, wenn Ihr Körper geerdet ist.

c. Halten Sie Geräte von Regen und Nässe fern. Das

Eindringen von Wasser in ein Gerät erhöht das Risiko

eines elektrischen Schlags.

d. Die Lichtquelle dieser Leuchte ist nicht austauschbar.

Wenn die Lichtquelle ihr Lebensende erreicht, muss die

gesamte Leuchte ersetzt werden.

3. Sicherheit von Personen

a. Seien Sie aufmerksam, achten Sie darauf, was Sie tun,

und gehen Sie sachgerecht mit einem Gerät um.

Benutzen Sie kein Gerät, wenn Sie müde sind oder

unter dem Einuss von Drogen, Alkohol oder

Medikamenten stehen. Ein Moment der Unachtsamkeit

beim Betrieb eines Geräts kann zu schweren

Verletzungen führen.

b. Verwenden Sie eine geeignete Schutzausrüstung.

Tragen Sie immer einen Augenschutz. Das Tragen

persönlicher Schutzausrüstung, wie Staubmaske,

rutschfeste Sicherheitsschuhe, Schutzhelm oder

Gehörschutz, je nach Art und Einsatz des Geräts,

verringert das Risiko von Verletzungen.

c. Vermeiden Sie eine unbeabsichtigte Inbetriebnahme.

Vergewissern Sie sich, dass das Gerät ausgeschaltet

ist, bevor Sie es an eine Steckdose oder einen Akku

anschließen, es hochheben oder tragen. Wenn Sie

beim Tragen des Geräts den Finger am Schalter haben

oder das Gerät eingeschaltet an die Stromversorgung

anschließen, kann dies zu Unfällen führen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMCL001B in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley FMCL001B Manual

Product: