644337
5
Zoom out
Zoom in
Previous page
1/8
Next page
4
5
MASTER CONTROL SECTION
1. AUX SEND
This jack socket sends the signals to an auxiliary source.
1. EFF SEND / FT SW (4M4S D MODEL ONLY)
This is a 1/4” jack input for sending EFF output signals. It also can be linked to a foot switch to control
the built-in effects processor.
2. PHONES
This jack socket sends the signals from main output or tape player to the headphones.
3. CTRL RM
These two jack sockets send stereo signals from the master output or an external player to the control
room speakers.
4. REC OUT
These two RCA sockets send stereo signals for recording purposes.
5. 2TK IN
This RCA output receives stereo signals from external players.
6. MAIN (L,R)
These balanced 1/4” (Ø 6.3 mm) jack outputs send balanced line level signals from the mixer to external
devices such as an EQ unit or a power ampli er. By using a mono jack in the outputs, the outputs
become unbalanced.
7.POWER Indicator
Indicator Indicates the status of the internal DC power supply.
8. Output Level meter
This level meter indicates the signal level of the stereo main output (Left and Right) or play input
(simultaneously with the signal sent to the phones jack).
9. MAIN output control
This slide fader is used for adjusting the  nal output level sent to the main output sockets.
10. +48V Phantom Power Switch and Indicator
This switch is used for turning on or off +48V phantom power. +48V voltage will be present on the
socket of each microphone input channel when this switch is pressed down.
Important: set all channel faders to minimum before turning on or off. Do not plug or unplug a
microphone after the switch has been turned on. Do not turn on the switch when a dynamic
microphone is in use.
11. AUX SEND
This knob controls the signal level sent to the AUX SEND socket.
12. 2TK TO MIX
The input signal from the 2TK RET sockets can be fed to the main bus when this switch is pressed down.
13. 2TK TO CTRL RM
Press down this button to feed the PLAY signal from an external device to the control room and
headphones; release this button to feed the main signal to the control room and headphones.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stagg S MIX 4M4S D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stagg S MIX 4M4S D in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stagg S MIX 4M4S D

Stagg S MIX 4M4S D User Manual - German - 8 pages

Stagg S MIX 4M4S D User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info