674114
3
Zoom out
Zoom in
Previous page
1/5
Next page
URUR1001 / English Instruction Manual
3
Switching the alarm on/off
1. To switch the alarm (alarms) on press and hold the ALARM 1 (5) / ALARM 2 (6) button until
the bell symbol appear on the display.
2. To switch the alarm (alarms) off again press and hold the same button.
ALARM SNOOZE
1. You can switch off the alarm signal for 9 minutes by pressing the DIMMER/SNOOZE/SLEEP
button (14). In 9 minutes the alarm signal will be repeated.
2. To switch off alarm sound signal press the ON/OFF button (4) or the button of the
corresponding alarm (5) or (6) .
LISTENING TO RADIO
1. Press the ON/OFF button (4) to turn the unit on.
2. Press the FUNCTION button (3) to select the FM Radio Mode.
3. Use the Tune + or Tune – button for tuning the desired FM station. If you press and hold the
Tune + or Tune – button for one second, then release, the unit will automatically scan to the
next broadcasting station.
4. Press the ON/OFF button (4) to turn the radio OFF.
Note: Ensure that the FM antenna is completely unrolled and extended for best FM reception.
To set/ recall the radio presets
1. Press the ON/OFF (4) button to turn the unit on.
2. Use the Tune + or Tune - button to select the desired FM station.
3. Press and hold the MEM/TIME button (7), ‘M01’will blink in the display.
4. Use the Tune + or Tune - button to select the desired preset station.
5. Press the MEM/TIME button (7) again to save the made settings
6. Repeat steps 2 through 5 to set more presets.
7. The unit can preset 10 stations totally for FM.
8. When ‘M02’ is blinking, press the Tune + or Tune - button to select the preset number.
9. When recalling preset stations, press MEM+ button (13) to select the preset number.
SLEEP OPERATION
When listening to radio, press DIMMER/SNOOZE/SLEEP button (14) to enter sleep mode. You
can just adjust the sleep timer from 90 minutes to 10 minutes by pressing the
DIMMER/SNOOZE/SLEEP button (14). The unit will automatically turn off after the selected
time.
DIMMER CONTROL
The dimmer button (14) allows you to set the brightness of the LED display to high, medium and
low 3 levels.
NATURAL SOUND
1. Connect the device to the mains and press the ON/OFF button (4).
2. Press the FUNCTION button (3) select the radio mode of sounds of nature.
3. Pressing the NATURAL SOUND SELECTOR button (12) select the necessary sound type:
brook (BROOK), bubbles (BUBBLE) or forest sounds (FOREST).
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR1001 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster UR1001

Soundmaster UR1001 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info