655956
57
Zoom out
Zoom in
Previous page
1/160
Next page
Preparing for use
ENGLISH 17
x Push on outer mounting flange (c) so that the curved side points southwards, i.e. away from the cut-off
wheel.
x Push on wheel (b) and turn in cut-off wheel attachment screw (11).
x Insert blocking pin (a) entirely into the blocking opening (12) and firmly tighten (30 Nm [22.1 ft·lbf]) the
cut-off wheel attachment screw (11).
Securely hold the power tool at the top handle with one hand and push it firmly onto the ground.
x Remove the blocking pin (a).
The power tool's spindle is designed for cut-off wheels with an inner bore of 20 mm.
For proper installation of cut-off wheels with a 1" inner bore, the spindle adapter disk is required that
is included with the delivery of the power tool.
The spindle adapter disk ensures correct fit of the 1" cut-off wheel on the spindle.
x Installation of cut-off wheels with 1" inner bore
takes place according to chap. 5.1 as of page 16.
x After applying the cut-off wheel on the spindle,
however, the spindle adapter disk (e) must be
put on the spindle (f) additionally.
x Put the spindle adapter disk (e) onto the spindle
so that it inserts between spindle and inner bore
of the cut-off wheel.
The support area of the spindle adapter disk
must point outwards in the installed condition,
i.e. away from the spindle.
The correct orientation of the spindle adapter
disk is mandatory to directly connect the plane
inner area to of the outer mounting flange to the
cut-off wheel. Only this warrants secure
attachment of the cut-off wheel.
x Application of the outer mounting flange and all
following steps must be performed again
according to chap. 5.1.
x For cut-off wheel removal, the power tool must be put securely on the ground. Securely hold the power
tool at the top handle with the left hand and push it firmly onto the ground. Î Chap. 5.4, page 18
x Insert blocking pin (a) entirely into the cut-off wheel blocking opening (12) to block the spindle.
Unscrew cut-off wheel attachment screw (11).
Remove wheel (b) and outer mounting flange (c) (also see chap. 5.1).
x Remove cut-off wheel from the spindle. For cut-off wheels with a 1" inner bore, the spindle adapter disk
also must be removed from the spindle.
x Put the outer mounting flange back onto the spindle so that the curved side points outward.
x Put on wheel (b) and turn in the cut-off wheel attachment screw (11) again. Î Chap. 5.1.
x Insert blocking pin (a) entirely into the blocking opening (12) and firmly tighten (30 Nm [22.1 ft·lbf]) the
cut-off wheel attachment screw (11) again.
Securely hold the power tool at the top handle with one hand and push it firmly onto the ground.
x Remove the blocking pin (a).
5.2 Installing cut-off wheels with 1" inner bore
5.3 Removing the cut-off wheel
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 879-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 879-12 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info