655956

Solo 879-12 Manual

56
Zoom out
Zoom in
Previous page
1/160
Next page
Preparing for use
ENGLISH 16
The cut-off wheels used must correspond to the specifications from chap. 7.1 on page 25!
The power tool spindle is designed for cut-off wheels with an inner bore of 20 mm.
Cut-off wheels with 1" inner bores must only be installed together with the spindle adapter disk.
Installation of cut-off wheels with 1" inner bore: Î Chap. 5.2, page 17!
When using cut-off wheels with an inner bore of 20 mm, no additional spindle adapter disk is
required.
x For cut-off wheel installation, the power tool must be put securely on the ground. Securely hold the
power tool at the top handle with the left hand and push it firmly onto the ground. Î Chap. 5.4, page 18
x Insert blocking pin (a) entirely into the cut-off wheel blocking opening (12) to block the spindle.
Unscrew cut-off wheel attachment screw (11). Remove wheel (b) and outer mounting flange (c).
The rotating direction of the cut-off wheel is always
as indicated by the arrow above – independently of
whether the cutting device is installed in the centre
or outer position.
x Put cut-off wheel (1) on spindle.
For cut-off wheels with specified rotating direction (arrow on the cut-off wheel), observe correct
alignment of the cut-off wheel during assembly (for rotation direction of the cut-off wheel, see above).
5 Preparing for use
5.1 Installing the cut-off wheel
c
11
b
a
12
1 11
b
c
Rotating direction
of cut-off wheel
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 879-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 879-12 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info