655956

Solo 879-12 Manual

51
Zoom out
Zoom in
Previous page
1/160
Next page
Power tool description
ENGLISH 11
If metals or mineral materials, such as stone, masonry, concrete or ceramics are processed with the power
tool, fine dust, dust, steam and smoke that contain substances hazardous to health may arise. These
substances may cause severe or fatal diseases, such as respiratory diseases, cancer, damage to the
reproductive system and genetic code (malformation of progeny).
For example, crystalline silicone dioxide can be released when processing quartz-containing materials
such as stone, masonry, granite or concrete. Respirable crystalline silicone dioxide may trigger severe or
fatal respiratory diseases, such as silicose, and is suspected of being carcinogenic.
A list of substances hazardous to health might possibly be available from the country-specific authorities,
institutes or professional associations.
x If you cannot assess the risk connected with use and setup of the power tool and the material
processed, read up the following documents on the health and safety risks:
– Material-specific safety data-sheets
– Operating instructions of the power tool
– Work instructions and safety provisions of your employer
– Information and recommendations of your dealer, specialist dealer or specialist workshop
– Information of the country-specific authorities, institutes and professional associations
x Always observe all the work instructions, safety notes and safety provisions for the secure and effective
handling of the cutting materials and the power tool that have been published by your employer,
country-specific authorities, institutes and professional associations.
x If possible avoid the generation of fine dust, dust, steam and smoke by the corresponding work conduct
and work techniques.
x If possible, use cut-off wheels suitable for wet cutting and the water connection of the power tool.
When cutting with water supply, the dust is reduced, visibility is improved and the cut-off wheel service
life is increased by the cooling effect of the water.
x If danger from inhalation of fine dust, dust, steam and smoke cannot be excluded by technical
measures, such as use of the power tool's water connection or a suitable extraction device, all persons
in the proximity and users of the power tool must wear suitable breathing protection equipment to
protect them from dust.
x Basic device
x Cut-off wheel
x Spindle adapter disk for cut-off wheels with 1" inner bore
x Tools: Combination tool (spark plug spanner with screwdriver), blocking pin and additional small
screwdriver
x These operating instructions (incl. EC Declaration of conformity: Î Chap. 11, page 39)
a: Type designation
b: Serial number
c: Bar code
d: Year of build
3.10 Dust emission
4 Power tool description
4.1 Scope of delivery
4.2 Type plate
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 879-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 879-12 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info