Manual Solis Blender PRO type 839 (page 47 of 54) (English, German, French)

535742

Zoom out

Zoom in

1/54

Faultfinding help

The blender is reliable and robust, and will normally operate without fault if it is used correctly. However, if a

problem should occur, in most cases you will be able to easily correct it yourself. The following faultfinding table

should help you:

CAUTION: Only carry out work on the appliance that is described in these operating instructions. Service and

repair work on the appliance must only be carried out by an authorized workshop. Do not use the appliance if it

is probably damaged or does not operate as expected.

Fault Correction

The motor runs irregularly Switch to the higher speed (2). If necessary empty some of the

or too slowly. ingredients out of the mixing jug. Break up solid ingredients outside the

blender (for example: nuts, hard chocolate).

The motor stops during Immediately switch to “0” (middle switch position; OFF) if the motor

operation or does not run. unexpectedly stops or remains stationary, in order to prevent

overheating. Then check the following points:

• If you have pressed the PULSE button, the motor stops when you release the

button. Press the PULSE button again if the blender should run again.

• The motor only runs if the mixing jug is completely and correctly assembled.

Check that the mixing jug is correctly assembled in accordance with the

instructions on page 36.

• The mixing jug is possibly not correctly locked onto the blender base. Hold the

blender base with one hand and hold the mixing jug by the handle and turn the

mixing jug clockwise as far as the distinct stop. However, do not use force.

• Remove the mixing jug from the base and carefully remove blocked pieces of

food around the blades with a wooden or plastic spoon. Do not use force in

order not to damage the blades.

• Cut up hard ingredients (for example: nuts, hard chocolate) outside the blender.

If necessary, empty some of the ingredients out of the mixing jug and then try

again with the higher speed 2.

CAUTION: Do not overload the motor with ingredients that are too hard or too

large. Do not overfill the mixing jug. If necessary, process solid ingredients in

several steps. The blender is not suitable for grating nuts, chocolate, or other

ingredients.

BDA_Blender_Mixer_DE_FR_E.qxd 27.08.2004 9:20 Uhr Seite 45

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solis Blender PRO type 839 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solis Blender PRO type 839 Manual

Product: