718540
16
Zoom out
Zoom in
Previous page
1/48
Next page
- If the model of your appliance does not have the accessories de-
scribed above, they can also be bought separately from the Technical
Assistance Service.
Instructions for use
Before use:
- Make sure that all the product’s packaging has been removed.
- Some parts of the appliance have been lightly greased. Consequently,
the  rst time the appliance is used a light smoke may be detected.
After a short time, this smoke will disappear.
- Prepare the appliance according to the function you wish to use:
Getting ready to sew
Connect the machine to the power supply
- Before connecting the power, make sure the voltage and frequency of
your electrical power conform to the machine. Make sure the power
switch is in the “off” position. Fit the nonreversible plug into the cord
socket and plug the machine in to the power supply.
- Then turn the power switch on
Foot control.
- Sewing speed can be varied the foot control.
- The harder you press on the control; the faster machine runs.
Extension table (accessory box)
Extension table (accessory box)
Extension table:
- The extension table provides added sewing surface and can be easily
removed for free arm sewing.
For free arm sewing:
- The extension table provides added sewing surface and can be easily
removed for free arm sewing.
For attaching table:
- Push the extension table until its lugs  t into the machine
Accessory box.
Sewing accessories are conveniently stored under the extension
table.
To snap on and snap off the presser foot
To snap off:
- Turn the hand wheel toward you to raise the needle to its highest
position. Raise the presser foot
- Press the lever on the back of the foot holder.
- The presser foot will drop off.
To snap on:
- Place the presser foot so the pin on the foot lies just under the groove
of the holder.
- Lower the foot holder to lock the foot foot in place.
Changing needle chart:
16

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac SW8240 - Cotton 24.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac SW8240 - Cotton 24.0 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 7,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info