619725

Snooper SR200 GPS Sport watch Manual

4
Zoom out
Zoom in
Previous page
1/12
Next page
4 • UK
RUN mode functions
How to enter and set up RUN mode
Press S7 to scroll through the main modes to RUN mode. If you are in TIME mode and want to go directly to RUN mode, you can
press S1.
When you get to RUN, after about 2 seconds, the screen changes and displays SEARCH, and your SR200 will start searching for
satellites, automatically. Once your SR200 has a GPS connection, it will then display the battery level, remaining memory, and then
the GPS GO screen, indicating it is ready for use.
Note: If there is no GPS signal, it will display the INDOOR screen.
User Tip: Short cut. Switch directly from TIME mode to RUN by pressing S1.
Using RUN mode
To begin your training session, press S1. The chronograph will automatically start to time your session. As you begin to run or walk,
you will be able to switch views by pressing S5, to observe your current pace, the distance you have travelled and your current
calorie burn.
To stop your training session, press S1.
To save the information collected during your training session, press and hold S1 for approx. 3 secs. Your SR200 will display HOLD
RESET and then SAVE, plus the number of the session.
User Tip: To switch data views during your training session, press S5 at any time.
User settings
To enter and set your RUN mode user settings, enter RUN mode and press and hold S11. Your SR200 will display HOLD SET and then
SET and AUTO LAP. Press S1 to scroll between the following user selectable settings and press S5 to enter:
AUTO LAP – Off, 0.4 miles, 1.0 mile, 2.0 miles, 3.0 miles, 4.0 miles, 5.0 miles. Alert On or Off. Press S1 to scroll through the settings
and S5 to select.
SET UNIT – Metric or Imperial. This is shown as KM (kilometres) or MI (miles), but it also determines the units of measurement
displayed for weight (lbs or kg) and height (feet and inches or cm).
SET USER – Gender, age, weight, height.
User Tip: Press the MODE button S7 to exit at any time.
RUN mode sub-views
While training, your SR200 can display different types of information, depending on your requirements. These can include distance,
pace, speed, calorie burn and time. You can switch between these views by pressing S5 at any time during your training session. You
can also set your SR200 to display different combinations of information.
DISTANCE: Displays and records how far you have run or walked.
PACE: Displays your current pace. Your SR200 will advise you that, if you continue running at your current speed, you will
complete a mile, or a km, in ‘x’ minutes. This value moves up or down, depending on your speed, and can be viewed as
you run.
SPEED: Displays a straightforward view of your current speed, in either mph or kmh.
CALORIE: Displays the number of calories you are burning per hour.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper SR200 GPS Sport watch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper SR200 GPS Sport watch in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info