758622
7
Zoom out
Zoom in
Previous page
1/116
Next page
7
! the laser beam is automatically
activated when the tool is turned
on
-press main button B briey to turn
on/o the laser beam
! 
the tool will automatically turn

-press and hold main button B to turn
o the tool
Projecting on walls
-mark the point where the laser line
should be projected
-place the wall mount base H with
the marked point centered in the
viewing window K
-mounting options:
1) use adhesive putty (included) on
surfaces L 7a or use tape (not
included) to mount base on dry and
clean surfaces 7b
-the adhesive putty may used
repeatedly
-to keep good adhesion, wash the
putty frequently and store it in the
adhesive putty storage S
-remove the wall-mount base from
the wall slowly after using, any
residue of the adhesive putty on the
wall can be cleaned by rolling the
adhesive putty over the residue
2) use pins (not included) through
pin holes N to mount base on soft
materials (plasterboard, soft wood)
7c
! be aware of sharp pins
3) use a screw or nail (not included)
through viewing window / screw
hole K to mount base 7d
4) use the magnet in base to mount it
on ferrous metals 7e
-attach tool to wall mount base
! ensure that clip ring J clips into
slot G on bottom of the tool
-rotate tool freely to the desired
angle 8
Projecting on oors
-when projecting a laser line on the
oor the digital angle indictation
shows ---
-use the protractor M to adjust the
laser line to any angle
-attach the wall mount base H to the
protractor M as illustrated 9
-attach tool to wall mount base
unintentionally blind other persons or
themselves)
Do not operate the measuring tool
in explosive environments, such

liquids, gases or dusts (sparks can
be created in the measuring tool which
may ignite the dust or fumes)
Keep the measuring tool away from
cardiac pacemakers (the magnet
inside the measuring tool generates
a eld that can impair the function of
cardiac pacemakers)
Keep the measuring tool away
from magnetic data media and
magnetically-sensitive equipment
(the eect of the magnet can lead to
irreversible data loss)
EXPLANATION OF SYMBOLS ON
TOOL
2 Read the instruction manual before
use
3 Do not dispose of electric tools and
batteries together with household
waste material
4 Laser radiation / Do not stare into
beam / Class 2 laser product
USE
Inserting/replacing the batteries 5
-alkali-manganese batteries are
recommended for the measuring
tool
-do not use rechargeable batteries
-remove cover A
-insert 2 x AAA batteries (pay
attention to correct polarisation)
-always replace all batteries at the
same time
-only use batteries from one brand
and with the identical capacity
-mount cover A
-remove the batteries from the
measuring tool when not using
it for extended periods (when
storing for extended periods,
the batteries can corrode and
self-discharge)
Battery level indicator 6
-during use the battery level indicator
on the display indicates the
remaining battery capacity
On/o
-press and hold main button B to turn
on the tool
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 1900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 1900 in the language / languages: All languages as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info