758622
6
Zoom out
Zoom in
Previous page
1/116
Next page
6
C Display
D Exit opening for laser beam
E Magnetic edge
F Angle measurement base
G Slot for wall mount base
H Wall mount base
J Clip ring
K Viewing window / screw hole
L Adhesive putty surfaces
M Protractor
N Pin hole
P Screw hole
Q Clamp for wall mount base
R Laser viewing glasses*
S Adhesive putty storage
* NOT STANDARD INCLUDED
SAFETY
All instructions must be read and
observed in order to work safely
with the measuring tool 2
Never make warning signs on the
measuring tool unrecognisable
If the equipment is used in a manner
not specied by the manufacturer, the
protection provided by the equipment
may be impaired
-The use of other operating
or adjusting equipment or the
application of other processing
methods than those mentioned
here can lead to dangerous
radiation exposure
Do not direct the laser beam at
persons or animals and do not

laser beam yourself, not even
from a distance (you could blind
somebody, cause accidents or
damage your eyes) 4
If laser radiation strikes your eye,
you must deliberately close your
eyes and immediately turn your
head away from the beam

the laser equipment
Have the measuring tool repaired

using original spare parts (this
ensures that the safety of the
measuring tool is maintained)
Do not allow children to use
the laser measuring tool
without supervision (they could
a
Digital line laser level 1900
INTRODUCTION
This tool is intended for aligning
objects and/or marking desired cutting
lines by means of a straight laser
line projection; with the accessories
supplied the tool can be used on a
variety of surfaces
This tool is intended to measure the
angle between the working surface
and true level
The measuring tool is suitable
exclusively for operation in enclosed
working sites
This tool is not intended for
professional use
Save these instructions for future
reference and include them with
the measuring tool when giving it
to a third party
TECHNICAL DATA
Working range
(approx.)* 4.5m
Accuracy ±0.1° (at 0° and
90°),
±0.2° (at other
angles)
Operating temperature -0°C to +40°C
Storage temperature -20°C to +70°C
Laser class 2
Laser type 635nm, < 1mW
Battery 3V; 2x 1.5V AAA
(LR03) alkaline
Weight 0.056 kg
Dimensions (length x
width x height) 61 x 48 x 34 mm
* Important: under unfavourable
conditions (e.g. in bright light) the tool's
working range will be reduced
TOOL ELEMENTS 1
A Battery compartment cover
B Main button
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 1900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 1900 in the language / languages: All languages as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info