701724
12
Zoom out
Zoom in
Previous page
1/104
Next page
12
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always switch o tool, disconnect plug from power
source, and ensure that all moving parts have come to a
complete standstill
Always keep tool and cord clean (especially ventilation
slots L 2)
- clean the tool after each use with a soft brush or a
cloth (do not use cleaning agents or solvents)
- remove the collection bag after each use, turn it
inside out and brush it thoroughly
- after removing the collection bag, ensure that possible
dirt residues are removed from the released air outlet
area
• Storage &
- securely mount storage rail S on the wall with 4 screws
(not supplied) and horizontally leveled
- store the tool indoors in a dry and locked-up place,
out of reach of children
- do not cover the tool with plastic (plastic may cause
moisture with rust/corrosion as a result)
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
TROUBLESHOOTING
The following listing shows problem symptoms, possible
causes and corrective actions (if these do not identify
and correct the problem, contact your dealer or service
station)
! switch off the tool and disconnect the plug before
investigating the problem
Tool does not operate
- no power supply -> check power supply (power cable,
circuit breakers, fuses)
- plug not connected -> connect plug
- extension cord damaged -> replace extension cord
- on/o switch defective -> contact dealer/service
station
- worn carbon brushes -> contact dealer/service
station
- defective motor -> contact dealer/service station
- blowing/vacuum tube not completely mounted ->
mount two-part blowing/vacuum tube
Tool operates intermittently
- on/o switch defective -> contact dealer/service
station
- internal wiring defective -> contact dealer/service
station
- impeller blocked by foreign object -> remove blockage
No/low blowing power
- selector switch in vacuuming mode -> set selector
switch in blowing mode
No/low vacuuming power
- selector switch in blowing mode -> set selector switch
in vacuuming mode
- collection bag is full/dirty -> empty/clean collection
bag
- vacuuming opening clogged up or blocked by foreign
object -> remove blockage
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 9 will remind you of this when the need for
disposing occurs
NOISE / VIBRATION
Measured in accordance with EN 60335 the sound
pressure level of this tool is 80 dB(A) and the sound
power level 100 dB(A) (standard deviation: 3 dB), and the
vibration 2.8 m/s² (triax vector sum; uncertainty K = 1.5 m/s²)
The vibration emission level has been measured in
accordance with a standardised test given in EN 60335; it
may be used to compare one tool with another and as a
preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for dierent applications, or with dierent
or poorly maintained accessories, may signicantly
increase the exposure level
- the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Aspirateur-souffleur de
jardin 0792/0796
INTRODUCTION
Cet outil a été conçu pour souer/rassembler et aspirer/
broyer les feuilles sèches et autres déchets secs de
jardinage, notamment l’herbe et les branches
Cet outil est uniquement destiné à un usage domestique
et n’est pas conçu pour être utilisé dans des lieux
humides
Cet outil n’est conçu pour un usage professionnel
Vériez que le conditionnement contient toutes les
pièces présentées dans le schéma 2
Lorsque des pièces manquent ou sont endommagées,
veuillez contacter votre distributeur
Lisez attentivement ce manuel d’instruction avant
d’utiliser l’outil et conservez-le pour pouvoir vous y
référer ultérieurement 3
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0796 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0796 in the language / languages: All languages as an attachment in your email.

The manual is 6,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info