Manual Sitecom WLM-4501 - N300 X4 (page 26 of 55) (English)

527712

Zoom out

Zoom in

1/55

for 802.11b clients, maximum 54Mbps for 802.11g

clients, and maximum 150Mbps for 802.11n clients).

Mode

It allows you to set the router to act in “AP”, “Client”

or “WDS” mode.

SSID The SSID (up to 32 printable ASCII characters) is the

unique name identified in a WLAN. The ID prevents

the unintentional merging of two co-located WLANs.

The default SSID of the router is “default”.

Channel Width Set channel width of wireless radio. Do not modify

default value if you don’t know what it is, default

setting is ‘Auto 20/40 MHz’.

Control Sideband Select the upper band or lower band for your radio

frequency. While upper band is selected, the channel

number you can select is from channel 5 to channel

11. While lower band is selected, the channel number

you can select is from channel 1 to channel 7.

Channel Number It is the radio channel used by the wireless LAN. All

devices in the same wireless LAN should use the

same channel. Please select the country you are

located and designate a channel that the router will

use. If you

want to let the router automatically to find

an available channel with the highest signal strength,

please select “Auto”.

Radio Power (mW)

Set the maximum output power of the router. The

higher output power, the wider coverage range.

Associated Clients

Click “Show Active Clients” button and you can see

the wireless clients connected to the router.

When you finish, click ‘Apply Changes’ to save the settings made and restart the

router so the settings will take effect after it reboots.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WLM-4501 - N300 X4 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sitecom WLM-4501 - N300 X4 Manual

Product: