489070
54
Zoom out
Zoom in
Previous page
1/58
Next page
4.2 Troubleshooting
If the IP camera is not working properly, before you contact the dealer of purchase for
help, please check the troubleshooting list here, this may help you to solve the problem by
yourself and therefore saves your valuable time.
Scenario Possible Solution
I can not connect to
IP camera
a. Please confirm the IP address setting of the computer you’re
using. If they’re not in the same subnet, they will not be able to
communicate with each other.
b. Please make the IP address you used to connect to the IP
camera is correct.
c. If you forget the IP address of the IP camera, you will have to
reset it to factory default value (which is 192.168.0.231) by
pressing ‘reset’ button at the bottom of the IP camera. You’ll
need a pen or pin to be able to press the reset button. Press and
hold reset button for 5 seconds, then try to connect to the IP
camera with IP address ‘192.168.0.231’ again.
d. Please make sure IP camera is correctly powered (the ‘Power’
LED should be on).
e. If you’re trying to connect to the IP camera from Internet,
please make sure the port that IP camera uses (Video and HTTP
port, see section XX) is not blocked by firewall or other software
/ hardware.
f. Contact dealer of purchase for help, if above solutions do not
work.
Image refreshes
very slow
a. Try a higher frame rate setting, if it’s not 30.
b. Try a lower resolution.
c. If you’re connecting this camera from Internet, it could be
caused by a slow Internet connection, and it’s not a problem
caused by camera. However, when the network connection is
slow, you should use lower frame rate / resolution.
d. Adjust the antenna if you’re using wireless connection. The
antenna should be perpendicular to the ground to get best
reception, and the distance between IP camera and computer /
wireless access point should not be too far.
e. Try to adjust ‘MTU’ setting if you’re using PPPoE to connect to
Internet. Ask your ISP or network administrator for detailed
instruction.
IP camera is not
responding
a. Is the network cable or wireless connection disconnected?
Please check it.
b. Unplug the power adapter from wall socket and plug it in again
after 10 seconds, then try to connect to the IP camera again.
c. If IP camera is correctly powered (‘Power’ LED is on), but you
still can not connect to the camera when you’re sure that IP
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-405 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-405 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info