Manual Sitecom WL-404 (page 7 of 64) (English)

489069

Zoom out

Zoom in

1/64

Rear - Network Camera

Antenna Attach the supplied antenna here. The antenna is adjustable; best

results are usually obtained with the antenna positioned vertically.

SPKR out If required, an external speaker can be plugged in here.

Power Input Connect the supplied 5V power adapter here. Do not use other

power adapters; doing so may damage the camera.

LAN port Use a standard LAN cable to connect your Network Camera to a

10/100BaseT hub or switch.

Note:

• Plugging in the LAN cable will disable the Wireless interface.

Only 1 interface can be active at any time.

• The LAN cable should only be connected or disconnected when

the camera is powered OFF. Attaching or detaching the LAN

cable while the camera is powered on does NOT switch the

interface between wired and wireless.

Reset Button This button is recessed; you need a pin or paper clip can be used to

depress it. It can be activated at any time the camera is in the

"ready" mode.

• Reset to manufacturer default value and reboot. When

pressed and held over 10 seconds, the settings of Network

Camera will be set to their default values.

Note:

After this procedure is completed, the Power LED will blink three

times to confirm that the reset was completed successfully.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-404 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sitecom WL-404 Manual

Product: