462899
58
Zoom out
Zoom in
Previous page
1/74
Next page
58
A
GE
58
DMZ IP Address: Specify the IP address of the DMZ host.
Non-UDP/TCP/ICMP LAN Sessions: Place a check in this box to enable
this feature. When a LAN application that uses a protocol other than UDP, TCP,
or ICMP initiates a session to the Internet, the router's NAT can track such a
session, even though it does not recognize the protocol. This feature is useful
because it enables certain applications (most importantly a single VPN
connection to a remote host) without the need for an ALG.
Note: This feature does not apply to the DMZ host (if one is enabled). The
DMZ host always handles these kinds of sessions.
Enabling this option (the default setting) enables single VPN connections to a
remote host. (But, for multiple VPN connections, the appropriate VPN ALG
must be used.) Disabling this option, however, only disables VPN if the
appropriate VPN ALG is also disabled.
Application Layer Gateway (ALG) Configuration: Place a check in
appropriate feature boxes to enable them. . Some protocols and applications
require special handling of the IP payload to make them work with network
address translation (NAT). Each ALG provides special handling for a specific
protocol or application. A number of ALGs for common applications are
enabled by default.
o PPTP: Allows multiple machines on the LAN to connect to their
corporate networks using PPTP protocol. When the PPTP ALG is
enabled, LAN computers can establish PPTP VPN connections either
with the same or with different VPN servers. When the PPTP ALG is
disabled, the router allows VPN operation in a restricted way -- LAN
computers are typically able to establish VPN tunnels to different VPN
Internet servers but not to the same server. The advantage of
disabling the PPTP ALG is to increase VPN performance. Enabling the
PPTP ALG also allows incoming VPN connections to a LAN side VPN
server (refer to
Advanced > Virtual_Server
).
o IPSec: (VPN) Allows multiple VPN clients to connect to their corporate
networks using IPSec. Some VPN clients support traversal of IPSec
through NAT. This option may interfere with the operation of such VPN
clients. If you are having trouble connecting with your corporate
network, try disabling this option. Check with the system administrator
of your corporate network whether your VPN client supports NAT
traversal.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-309 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info