462910
26
Zoom out
Zoom in
Previous page
1/73
Next page
WL-308 Gaming Router Full Manual
26
Wireless
These options allow you to enable/disable the wireless interface, switch between
the 11n, 11b/g and 11b radio band and channel frequency
Enable Wireless: Place a check in this box to enable the wireless interface.
It is enabled by default.
Wireless Network Name: The SSID is a unique named shared amongst all
the points of the wireless network. The SSID must be identical on all points of
the wireless network and cannot exceed 32 characters.
802.11 Mode: Select the IEEE 802.11 mode from the drop-down list. For
example, if you are sure that the wireless network will be using only IEEE
802.11g clients, then it is recommended to select 802.11g only instead of
2.4 GHz B+G, which will reduce the performance of the wireless network.
You may also select Mixed 802.11n, 802.11g and 802.11b. If all of the
wireless devices you want to connect with this router can connect in the same
transmission mode, you can improve performance slightly by choosing the
appropriate "Only" mode. If you have some devices that use a different
transmission mode, choose the appropriate "Mixed" mode.
Wireless Channel: Select a channel from the drop-down list. The channels
available are based on the country’s regulation. A wireless network uses
specific channels in the wireless spectrum to handle communication between
clients. Some channels in your area may have interference from other
electronic devices. Choose the clearest channel to help optimize the
performance and coverage of your wireless network.
Transmission Rate: Select a transmission rate from the drop-down list. It is
recommended to use the Best (automatic) option.
Channel Width: Select a channel width from the drop-down list.
Visibility Status: Select Visible or Invisible. This is the SSID broadcast
feature. When this option is set to Visible, your wireless network name is
broadcast to anyone within the range of your signal. If you're not using
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-308 in the language / languages: English as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info