431346
9
Zoom out
Zoom in
Previous page
1/56
Next page
2.2 Procedure for Hardware Installation
2.2.1 Decide where to place your Wireless Broadband Router
Y
m
c
in
a
ou can place your Wireless Broadband Router on a desk or other flat surface, or you can
ount it on a wall. For optimal performance, place your Wireless Broadband Router in the
enter of your office (or your home) in a location that is away from any potential source of
terference, such as a metal wall or microwave oven. This location must be close to power
nd network connection.
2.2.2 Setup LAN connection
a. Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port
to one of the LAN ports of this product.
b. Wireless LAN connection: locate this product at a proper position to gain the best
transmit performance.
Figure 2-3 Setup of LAN and WAN connections for this product.
2.2.3 Setup WAN connection
P
b
C
a
n
s
p
repare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet
ackbone. Figure 2-3 illustrates the WAN connection.
2.2.4 Power on
onnecting the power cord to power inlet and turning the power switch on, this product will
utomatically enter the self-test phase. When it is in the self-test phase, the Power LED will
ot be lighted for about 15 seconds, and then Power will flash 9 times to indicate that the
elf-test operation has finished. Finally, power will be lit continuously to indicate that this
roduct is in normal operation.
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom wireless network modem router mimo xr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom wireless network modem router mimo xr in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info