527763
53
Zoom out
Zoom in
Previous page
1/68
Next page
51
5.7.4 Route Table
The Route Table page displays routing table and allows the user to manually enter the
routing entry. The routing table will display the routing status of Destination, Netmask,
Gateway, and Interface. The interface br0 means the USB interface; lo0 means the
loopback interface; and ppp1 means the PPP interface. The Gateway is the learned
Gateway
New Enhancement for Routing Table
• The Gateway field of the static route entry allows users to either enter a Gateway IP
address or select a Network Interface.
• All user-defined routes retained in the CPE memory, regardless if they are already in the
Routing Table, are displayed on the same Route Table page.
• All user defined route entries kept in the CPE memory during run time are saved to flash
when the user chooses to save and reboot the CPE. When CPE restarts, it reloads all
saved user-defined routes to the CPE memory and tries to apply to the system.
• A user-defined route entry is added to the Routing Table whenever the system provides
an environment that makes the route entry applicable. It is removed from the Routing
Table whenever the route entry becomes not applicable. e.g. If the route entry’s Gateway
is associated with a dynamic Network Interface but the connection is not established, then
the route entry does not appear in the Routing Table. When that interface comes up later,
the route entry is then added.
• If the selected Network Interface is static or is dynamic and the connection is already up,
then the route entry appears in the Routing Table immediately. If there is a Gateway
associated with the selected Network Interface, then that Gateway’s IP address appears in
the Gateway field of the route entry
• If the selected Network Interface is dynamic but the connection is not established, then
the route entry does not appear in the Routing Table. When the interface comes up later,
the route entry is then added.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom DC-214 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom DC-214 in the language / languages: English as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sitecom DC-214

Sitecom DC-214 Installation Guide - Dutch - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info