430488

Sitecom broadband xdsl cable router w 4p switch Manual

76
Zoom out
Zoom in
Previous page
1/81
Next page
DC-202 xDSL/Cable Broadband router
76
Buttons
Save
Save the RIP setting. This has no effect on the Static Routing Table.
Add
Add a new entry to the Static Routing table, using the data shown in
the "Properties" area on screen. The entry selected in the list is
ignored, and has no effect.
Update
Update the current Static Routing Table entry, using the data shown
in the "Properties" area on screen.
Delete
Delete the current Static Routing Table entry.
Clear Form
Clear all data from the "Properties" area, ready for input of a new
entry for the Static Routing table.
Generate
Report
Generate a read-only list of all entries in the Static Routing table.
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed
to the DC-202, so that they can be forwarded to the external LAN, WAN, or
Internet. To achieve this, the local LAN must be configured to use the DC-
202 as the Default Route or Default Gateway.
Local Router
The local router is the Router installed on the same LAN segment as the
DC-202. This router requires that the Default Route is the DC-202 itself.
Typically, routers have a special entry for the Default Route. It should be
configured as follows.
Destination IP Ad-
dress
Normally 0.0.0.0, but check your router docu-
mentation.
Network Mask Normally 0.0.0.0, but check your router docu-
mentation.
Gateway IP Address The IP Address of the DC-202.
Metric 1
Other Routers on the Local LAN
Other routers on the local LAN must use the DC-202's Local Router as the
Default Route. The entries will be the same as the DC-202's local router,
with the exception of the Gateway IP Address.
• For a router with a direct connection to the DC-202's local Router, the
Gateway IP Address is the address of the DC-202's local router.
• For routers which must forward packets to another router before reach-
ing the DC-202's local router, the Gateway IP Address is the address of
the intermediate router.
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom broadband xdsl cable router w 4p switch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom broadband xdsl cable router w 4p switch in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info