Manual Simrad PI54 (page 189 of 322) (English)

23336

189

Zoom out

Zoom in

1/322

References

177

850-165186 / Rev.B

Echo presentation setup

These settings are used to set up the echo sounder presentation

parameters on the PI54. The operational parameters are set up

using t he Echo sounder setup dialogue.

To access the parameters, press the ADJ (Adjust) button when

you have an echo sounder presentation in the active window.

You can also press the ENT button, and then select Echo

presentation setup on the Echo quick menu.

Range start: This is the upper depth from which you wish the

echo sounder shall start. This value will typically be 0 meters,

but you may for example set up the echo sounder to only present

echoes from 5 meters below the sea surface and downwards.

Range: This is the vertical depth range for the echo sounder.

You can set it to change depth range automaticially (AUTO), or

you can define your own fixed range. The maximum range will

depend on the chosen echo sounder frequency, as the 38 or 50

kHz modes will detect echoes deeper than the 200 kHz mode.

Gain: This is the gain in the echo sounder’s preamplifier. The

gain must be defined manually, and you can choose any value

between 1 and 100%. In most cases, use a value around 60%. If

you use too much gain, the echogram will contain a lot of noise

and false echoes.

White line: This parameter allows you to switch the White line

function on or off. When enabled, a band in the current

echogram background colour is inserted immediately below the

detected bottom depth.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Simrad PI54 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad PI54

Simrad PI54 User Manual - Norwegian - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Simrad PI54 Manual

Product: