Manual Silvercrest SEF 2300 B2 - IAN 270289 (page 71 of 74) (English, German, Dutch, French)

646952

Zoom out

Zoom in

1/74

• Assemble the parts again if you do not

want to store the frying fat in the oil con-

tainer14.

9.4 Re-using used frying fat

1. If you stored the frying fat outside of the

fryer, it should be melted first (as with

fresh fat) in a pan, before you fill it into

the fryer.

2. If you stored the frying fat in the fryer, it

must now be heated slowly and careful-

ly in order to avoid any splashes.

Let the fryer and the fat stand for a

while at room temperature, until the fat

has reached room temperature.

3. A fork should carefully be punched sev-

eral times into the surface.

4. Put the mains plug10 into the wall

socket and set the temperature controller

at a temperature of 130 °C.

5. Wait until the fat is melted completely.

Only then the temperature controller8

should be set at the frying temperature.

10. Disposal

The symbol showing a wheel-

ie bin crossed through indi-

cates that the product requires

separate refuse collection in

the European Union. This ap-

plies to the product and all ac-

cessories marked with this symbol. Products

identified with this symbol may not be dis-

carded with normal household waste, but

must be taken to a collection point for recy-

cling electric and electronic appliances. Re-

cycling helps to reduce the consumption of

raw materials and protect the environment.

Packaging

When disposing of the packaging, make

sure you comply with the environmental reg-

ulations applicable in your country.

11. Home-made fresh

French-fried potatoes

That's how the potatoes should

- The potatoes should have a firm skin

and not yet have sprouted.

- Floury or mainly waxy potatoes should

be used.

- The potatoes should not be too small

and be of approximately the same size.

This facilitates the processing.

1. Peel the potatoes.

2. Cut the potatoes into stripes or slices,

depending on your wishes.

3. Put the potatoes in water for approx.

1hour before frying.

4. Dry the potatoes, e.g. with a paper towel.

5. First frying process: The potatoes should

be fried for approx. 10 - 14 minutes at

a temperature of approx. 150 °C.

6. Take the frying basket18 out of the oil/

fat and hang it with the mount under the

handle17 on the front edge of the oil

container14 for dripping off.

7. Heat the oil/fat up to a temperature of

approx. 170 °C.

8. Second frying process: The potatoes

should now be fried again for approx.

3 - 4 minutes at a temperature of ap-

prox. 170 °C.

9. Finish the frying process as soon as the

desired browning level has been

reached.

NOTE: deep-frozen French-fried potatoes

need only be fried once.

12. Troubleshooting

If your device fails to function as required,

please try this checklist first. Perhaps there is

only a minor problem, and you can solve it

yourself.

B53B)ULWWHXVHB%ERRN6HLWH0LWWZRFK$XJXVW

I do have a Monsieur cuisine, cannot remove the mixing bowl, it’s lock and does not show on your guidance book how to do it.
Please could you let me know
Thanking you
Mrs Allison Submitted on 7-9-2020 at 17:51
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEF 2300 B2 - IAN 270289 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SEF 2300 B2 - IAN 270289 Manual

Product: