754156
12
Zoom out
Zoom in
Previous page
1/57
Next page
12 GB/IE
Cleaning and Maintenance
Problems Causes Solution
Function display 13 off. Mains plug 4 not connected.
Check that the mains plug
4
is
plugged in
correctly.
Check that the cable is supplied with
power.
Please try plugging the mains plug
4
into an-
other socket. Should the problem still persist,
please consult one of the afore mentioned
service centres (refer to "Service" chapter).
No steam comes out of
the steam jets 20 .
Steam button
16
has not been
pressed.
Press the steam button 16 .
The device is not ready for
operation. Press the steam button 16 for approximately
30 seconds. If no steam is produced after
this time, please consult one of the afore
mentioned service centres (refer to "Service"
chapter).
No water in the water tank 11 . Fill the water tank 11 to the lower edge of
the thread.
Water tank 11 has not been
correctly inserted.
Remove the water tank 11 and put it in
again. Check that it is seated correctly.
The steam vents may be
blocked by limescale.
Please consult one of the afore mentioned
service centres (refer to "Service" chapter).
Sudden increase in the
volume coming from the
pump
No water in the water tank 11 .Switch off the device and fill the water tank
11 with water.
Water tank 11 has not been
correctly inserted.
Remove the water tank 11 and put it in
again. Check that it is seated correctly.
Water is flowing from
the steam jets 20 .
Possible residual condensation
in the steam tube Press the steam button 16 until no more
steam comes out. Place a cloth under the
device to ensure that the floor does not
become wet. If water continues to flow from
the device, switch off the device. Wait for at
least 5 minutes until the steam base 9 and
the pad 8 have been allowed to cool. Try
again.
The turbo brush 18
does not turn
The ON/OFF button 5 has
not been pressed.
Press the ON/OFF button 5 firmly. Should
the problem still persist, please consult one
of the afore mentioned service centres (refer
to "Service" chapter).
114903_silv_Dampfbesen SDB 1500 A1_content_FI_NL.indd 12 11.06.15 17:08
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDB 1500 A1 - IAN 114903 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 1500 A1 - IAN 114903 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info