Manual Silvercrest SBR 3.0 A1 - IAN 106958 (page 2 of 6) (English, German, Dutch)

649229

Zoom out

Zoom in

1/6

Prior to use

Take the SBR 3.0 A1 (A) and the accessories out of the package and remove the plastic packaging.

The SBR 3.0 A1 (A) must be fully charged before using it for the first time.

Charging the Bluetooth

audio transmitter/receiver

To charge the internal battery of the SBR 3.0 A1 (A), connect the micro USB socket (7) via the

supplied USB charging cable (C) to the USB power supply. Insert the USB power supply into a socket

that is always easily accessible. The red LED (3) lights up while charging and goes out when the

battery is fully charged.

Explanation of the RX and TX modes and possible uses

The SBR 3.0 A1 (A) can be used in the following two modes:

1. As receiver in RX mode

In this mode, for example, you can play audio signals from your smartphone via a Bluetooth

connection on your stereo system, which you have already connected to the SBR 3.0 A1 (A) via the

supplied RCA cable (B). Other possible playback devices include, for example, TV or active speakers.

WARNING! Never operate the SBR 3.0 A1 in conjunction with wired headphones.

The use of wired headphones may create harmful sound pressure.

In RX mode, it is imperative that the devices from which the audio signals are transmitted have a

Bluetooth

function.

The many possible uses of the SBR 3.0 A1 depend on the devices which you want to connect. For

further details, please read the operating instructions for your devices.

2. As transmitter in TX mode

In this mode, for example, you can wirelessly transmit audio signals to a Bluetooth

headset or

Bluetooth

loudspeaker from an audio source (for example, TV, stereo system, MP3 player) which

itself does not have Bluetooth

and which you have already connected to the SBR 3.0 A1 via one of

the supplied cables (B, D).

In TX mode, it is imperative that the devices to which the audio signals are to be transmitted have a

Bluetooth

function.

The many possible uses of the SBR 3.0 A1 depend on the devices which you want to connect. For

further details, please read the operating instructions for your devices.

The LED indicators and their meaning

Status of LED indicator Meaning

Blue LED (2) flashes twice power-on procedure

Blue LED (2) flashes three times power-off procedure

Blue LED (2) flashes rapidly and continuously pairing mode (connecting)

Blue LED (2) flashes approx. once per second connection is restored

Blue LED (2) on connected

Blue LED (2) off standby

Red LED (3) on battery is charging

Red LED (3) flashes five times (at one minute intervals) battery capacity low

Red LED (3) off (when connected to power supply) battery fully charged

Green LED (4) on TX mode

Yellow LED (5) on RX mode

First use

Please note that the range of a Bluetooth

connection is restricted. The distance

between transmitter and receiver should thus be 10 metres at most.

To restart the device from standby mode, keep the button (1) pressed for approx. two

seconds.

RX mode (receiver mode)

Device was already connected to a Bluetooth

device:

If you slide the mode selection switch (6) to the RX position, the device tries for approx. 300 seconds

to connect to the known Bluetooth

device and then switches to standby mode. Press the button (1) to

try to connect again for approx. 300 seconds.

If the wireless connection is interrupted during operation, the device tries for approx. 300 seconds to

restore the connection and then switches to standby mode. Press the button (1) to try to connect again

for approx. 300 seconds.

 Insert the 3.5mm jack plug of the supplied RCA cable (B) into the Audio Out socket (8) of the SBR

3.0 A1. Then connect the red plug of the RCA cable (B) to the right RCA audio input and the

white plug to the left RCA audio input of your playback device (for example, stereo system, TV).

Your audio source must have an RCA audio input.

Device was not yet connected to a Bluetooth

device:

If you slide the mode selection switch (6) to the RX position, the device switches to pairing mode until it

is connected or switched off.

 Slide the mode selection switch (6) to the RX position. The yellow LED (5) lights up. The pairing

mode is now activated and the blue LED (2) flashes rapidly and continuously.

If you are asked for a PIN during the pairing process, enter "0000".

 Activate the Bluetooth

function on your smartphone and start searching for Bluetooth

devices.

You will recognise the Bluetooth

audio transmitter/receiver SBR 3.0 A1 by its name "SBR 3.0

A1" in the list of devices which are found. Select it and establish the connection.

 Once the connection is established, the blue LED (2) lights up continuously.

 You can now listen to music files stored on your smartphone via the connected playback device.

 For further details, please read the operating instructions for your playback devices.

TX mode (transmitter mode)

Device was already connected to a Bluetooth

device:

If you slide the mode selection switch (6) to the TX position, the SBR 3.0 A1 tries for approx. 300

seconds to connect to the known Bluetooth

device and then switches to standby mode. If you now

press the button (1), the SBR 3.0 A1 switches to pairing mode for approx. 300 seconds and tries to

connect to a new device.

If the wireless connection is interrupted during operation, the device tries for approx. 300 seconds to

restore the connection and then switches to standby mode. Press the button (1) to try to connect again

for approx. 300 seconds.

 Connect the headphone socket of your audio source (for example, TV, stereo system, MP3

player) via the audio cable (D) to the Audio In socket (9) of the SBR 3.0 A1. If your audio source

has a 6.3mm headphone socket, also use the adapter (F). Attach it first to a plug of the audio

cable (D) and then insert it into the headphone socket of your audio source.

 Alternatively, you can also connect your audio source via the RCA cable (B) to the SBR 3.0 A1

(A). Your audio source must have an RCA audio output. Then connect the red plug of the RCA

cable (B) to the right RCA audio output and the white plug to the left RCA audio output of your

audio source. Insert the 3.5mm jack plug of the RCA cable (B) into the Audio In socket (9) of the

SBR 3.0 A1.

 For further details, please read the operating instructions for your audio source.

Device was not yet connected to a Bluetooth

device:

If you slide the mode selection switch (6) to the TX position, the device switches to pairing mode for

approx. 300 seconds and then switches to standby mode. Press the button (1) to start pairing mode

again for approx. 300 seconds.

 Now slide the mode selection switch (6) to the TX position. The green LED (4) lights up. The

pairing mode is then activated for approx. 300 seconds and the blue LED (2) flashes rapidly and

continuously.

 Also switch your Bluetooth

playback device (for example, BT headphones or BT loudspeakers)

to pairing mode.

 For further details, please read the operating instructions for your Bluetooth

playback device.

 The two devices in pairing mode (SBR 3.0 A1 and Bluetooth

playback device) then establish a

Bluetooth

connection. When the connection is established, this is indicated by the constant

lighting of the blue LED (2) on the SBR 3.0 A1 (A).

 When the Bluetooth

connection is established, the audio signals of your audio source are

transmitted wirelessly to your playback device and are then played by it.

Resetting the SBR 3.0 A1

To reset the SBR 3.0 A1 (A) and delete the previous connections, slide the mode selection switch (6) to

the RX or TX position. Now keep the button (1) pressed for approx. 5 seconds until the green LED (4)

and the yellow LED (5) flash three times at the same time. The SBR 3.0 A1 is then in pairing mode

again. Please note that resetting the SBR 3.0 A1 deletes both the TX and RX connections.

Storage when not in use

You should recharge the battery regularly if you do not use the device for a prolonged

period of time. This will maintain the performance of the battery.

Store the device in a dry, cool location.

Troubleshooting

The transmission of the audio signal does not work or only poorly

 Make sure that the SBR 3.0 A1 (A) and the audio source or playback device are not too far

apart.

 Make sure that the SBR 3.0 A1 (A) and the audio source or playback device are connected.

 Make sure that the correct socket (Audio In /Audio Out) is used.

 Check whether the internal battery is charged. Charge it if necessary.

 Check whether the mode selection switch (6) is in the correct position.

 Check the volume setting of the playback device.

 Check all cable connections.

Environmental and disposal information

When the crossed out wheelie bin symbol appears on a product, this indicates that the

product is subject to the European Directive 2012/19/EU.

All old electrical and electronic devices must be separated from normal household waste

and disposed of at designated state facilities. The correct disposal of old devices in this

manner will prevent environmental pollution and human health hazards.

For further information about proper disposal, contact your local authorities, waste disposal office or

the shop where you bought the device.

The built-in battery cannot be removed for disposal.

Dispose of the packaging in an environmentally compatible manner. Cardboard can be put out for

municipal paper collections or brought to public collection points for recycling. Films and plastic used

for packaging the device are collected by your local disposal services and disposed of in an

environmentally compatible manner.

Conformity information

This device meets the basic requirements and other relevant regulations of the EMC

Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC, the R&TTE Directive

1999/5/EC, the ERP Directive 2009/125/EC and the RoHS Directive 2011/65/EU.

The complete EU Declaration of Conformity is available on request at:

ce@targa.de

Warranty and servicing advice

Warranty of TARGA GmbH

This device is sold with three years warranty from the date of purchase. Please keep the original

receipt in a safe place as proof of purchase. Before using your product for the first time, please read

the enclosed documentation. Should any problems arise which cannot be solved in this way, please

call our hotline. Please have the article number and, if available, the serial number to hand for all

enquiries. If it is not possible to solve the problem on the phone, our hotline support staff will initiate

further servicing procedures depending on the fault. Within the warranty period the product will be

repaired or replaced free of charge as we deem appropriate. No new warranty period commences if

the product is repaired or replaced. Consumables such as batteries, rechargeable batteries and lamps

are not covered by the warranty.

Your statutory rights towards the seller are not affected or restricted by this warranty.

Service

Phone: 020 – 70 49 04 03

E-Mail: service.GB@targa-online.com

Phone: 01 - 4370121

E-Mail: service.IE@targa-online.com

Phone: 027 78 11 03

E-Mail: service.MT@targa-online.com

Phone: 02 – 20 09 025

E-Mail: service.CY@targa-online.com

IAN: 106958

Manufacturer

TARGA GmbH

Coesterweg 45

59494 SOEST

GERMANY

I've connected this device on my laptop but didn't see any memory and i don't know how to operate it Submitted on 12-12-2017 at 10:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBR 3.0 A1 - IAN 106958 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SBR 3.0 A1 - IAN 106958 Manual

Product: