555876
2
Zoom out
Zoom in
Previous page
1/2
Next page
CE1B3035en / 11.06.2001 Subject to alteration Siemens Building Technologies / Landis & Staefa Division
Do you want to enter your own 7-day
switching pattern?
A switching pattern consisting of 24 vertical pairs of
segments can be entered for every weekday. Each pair
represents a period of one hour. This means that a
switching action can occur every 60 minutes.
Example:
0
Switching pattern with factory setting Mo - Fr
1261824
Automatic operating mode changeover takes place
according to such a switching pattern, provided the
operating mode selector ist set to position
.
Proceed as follows:
Press once to reach the entry mode
The current switching pattern for day 1
(Monday) will be displayed. The segments
at far left start flashing and the time of day
00:00 is displayed
Press
+
-
to set the point in time where you
want to assign the operating mode
Assignment of the operating mode to a point
in time is made by pressing
and
Press or
1...7
to save the setting and to
change to the next day
When entry of the 7-day switching pattern is
finished, press
and the entry will be
saved
Caution:
30 seconds after the last entry is made, the
controller will leave the entry mode. In that case,
the last switching pattern changes made will not
be saved!
Do you want to adjust the time of day?
Setting the time of day:
Press once
The time display starts flashing
Press
+
-
to set the required time
Press or to save the setting and to
leave the entry mode
Doyouwishtoreturntothefactorysettings?
+
-
To reset, first press and hold the button , then
press the two buttons
+
and
-
simultaneously
for 3 seconds. This means that the switching
times and setpoints will be reset to their default
values.
Caution: All individual settings will be
lost!
Temperature setpoint in normal operation: 20 °C
Temperature setpoint in energy saving mode: 8 °C
Day/s Normal
operation
Energy saving
mode
Mo (1) – Fr (5) 6:00 – 8:00 h
17:00 – 22:00 h
22:00–6:00h
8:00 – 17:00 h
Default
values
Sa (6) – Su (7) 7:00 – 22:00 h 22:00 – 7:00 h
To reset, first press and hold the button , then press the two
buttons
+
-
simultaneously for 3 seconds. All individual settings
will be reset to their standard values.
Does the symbol appear on the display?
(Only with battery-powered versions)
When this symbol appears, you need to replace the
batteries within the next two weeks.
Do you want to change the batteries?
(Only with battery-powered versions)
Get two new alkaline batteries type AAA, 1.5 V
Remove the battery holder, then the batteries, insert
the new batteries and replace the battery holder
Caution: The setting data are maintained for
a maximum of three minutes only!
Make certain the old batteries are disposed of
properly, in compliance with environmental
requirements
Energy saving tips without sacrificing comfort
Never allow room temperatures to exceed 21 °C
Move the operating mode selector to energy saving
mode, even if you are absent for short periods of
time only.
Air out the rooms for short periods of time only, but
properly, with the windows wide open
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE - Landis Staefa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE - Landis Staefa in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE - Landis Staefa

Siemens RDE - Landis Staefa Quick start guide - English - 2 pages

Siemens RDE - Landis Staefa User Manual - German - 2 pages

Siemens RDE - Landis Staefa User Manual - Dutch - 2 pages

Siemens RDE - Landis Staefa User Manual - French - 2 pages

Siemens RDE - Landis Staefa Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info