620427
2
Zoom out
Zoom in
Previous page
1/2
Next page
Energy saving tips without sacrificing comfort
Never allow room temperatures to exceed 21 °C
Press
to change to energy saving or frost protection mode, even if
you are absent for short periods of time only
Air out the rooms for short periods of time only, but properly, with the
windows wide open
Do you want to switch on DHW heating?
Press
to switch on DHW heating
When DHW heating is switched ON, the display shows the
symbol
When pressing
once again, DHW heating will be switched OFF and the
displays will not show the
symbol
Does the symbol appear on the display?
1.5V
'AA'
1.5V
'AA'
+-
When this symbol appears, you need to replace the batteries within the following
2 weeks.
Do you want to change the batteries?
Get 2 new alkaline batteries type AA, 1.5 V
Remove the battery holder, then the batteries, insert the new batteries and
replace the battery holder
Make certain the old batteries are disposed of properly, in compliance with
environmental requirements
Recalibrating the sensor
+
+
If the room temperature displayed by the controller does
not match the temperature effectively measured, the
temperature sensor can be recalibrated.
Follow the steps below to recalibrate the sensor:
1. In normal operation, press the “+” and operating mode
changeover buttons simultaneously for more
than 3 seconds, switching the system to calibration
mode.
2. The display format in calibration mode is the same as in
normal or energy saving mode, but with the temperature
digits flashing at 1Hz. You can adjust the temperature to
the desired value with the “+” or “-” button at 0.5 K per
step. The maximum adjustable range is +/- 3 K.
C
3033Z01
3. If no button is pressed for 5 seconds, the system will
return to the initial operating mode and the temperature
is set to the new value.
Note that the operating mode changeover and DHW
buttons are deactivated in calibration mode.
CE1B3033en / 18.11.2005 Subject to alteration Building Technologies / HVAC Products
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDD10.1DHW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDD10.1DHW in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDD10.1DHW

Siemens RDD10.1DHW User Manual - German - 2 pages

Siemens RDD10.1DHW Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info