298545
4
Zoom out
Zoom in
Previous page
1/8
Next page
2
Gigaset A24 / AUS / A31008-M1640-C411-1-7619 / Wyoming_MT.fm / 26.10.2004
Setting up the handset for use
Fitting the battery pack
Fit the plug into the socket.
Insert the battery (see diagram below).
Place the battery leads in the cable guides.
Closing the battery cover
Place the cover on the battery compartment as
shown in the diagram, then push it up until it clicks
into position.
Opening the battery cover
Press down on the battery cover below its upper
end and slide the cover down.
Registering the handset on
the base
Before you can make phone calls you must 'intro-
duce' the handset to your base (register the hand-
set).
Automatic registration of Gigaset /A240
Place the handset in the base with the display fac-
ing the front. The handset will be registered to the
base after about one minute. The idle display is
shown (battery symbol and the internal number of
the handset in the top left, plus the date and time,
if they've been set).
If "Automatic Registration" has not worked after
about 1 minute, lift the handset out of the base for
around 5 seconds and then replace it in the base,
or register the handset manually.
Manual registration:
If automatic registration did not work you will have
to register the handset to the base manually.
Activate the handset if required.
1. On the handset:
MENU ¢ REGISTER HS ¢
enter your system PIN (default is 0000)
¢ OK.
The display shows
REGISTER HS during the regis-
tration procedure.
2. On the base: Start registering the base within
60 sec. as described in the base instructions.
Charging the battery pack
To charge the battery pack, leave the handset in
the base/charging cradle for approx. ten hours.
The battery pack is now fully charged. The charge
status of the battery pack is correctly displayed
only after uninterrupted charging/discharging.
You should not therefore interrupt the charging
process.
Charging is electronically controlled to prevent
overcharging. The battery pack heats up during
charging; this is normal and not dangerous. After a
time the charge capacity of the pack will decrease
for technical reasons.
Change display language
You can view the display texts in different lan-
guages.
MENU ¢ O 2 ¢ Select language
(e.g. digit combination
Q2 for English):
W
Place the battery leads in the cable
guides so that the battery cover cannot
catch on the leads and damage them
when it is closed.
Only insert the recommended re-
chargeable battery pack, i.e. never use a
normal battery pack as this could damage
your health and cause injury.
Never use non-Siemens battery charg-
ers as this could damage the battery pack.
The handset should only be placed in a
base or charging cradle that is intended
for it.
Q 1
German
Q L
Spanish
Q 2
English Q M Portuguese
Q I
French Q N Turkish
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset a24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset a24 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info