604840
4
Zoom out
Zoom in
Previous page
1/5
Next page
DRIVELINK combo USb3.0
c)3.5"and5.25"IDEdevicesconnecttotherespective
portoftheDriveLinkComboUSB3.0viatheincluded
IDEdatacable.Powerisprovidedviatheincluded4-pin
powercableforIDEdevices.
d)3.5"and5.25"SATAdevices:
SATA devices are directly plugged to the respective port
oftheDriveLinkComboUSB3.0,whichalsopowers
themwithoutanyadditionalcabling.
4.SwitchontheDriveLinkComboUSB3.0.Thedevicewillbe
detectedandinstalledautomatically.ConnectedHDDs/
opticaldeviceswillbedisplayedinthelemanager.
Note:
There is no need to install additional drivers.
Before you shut down your PC, remove the DriveLink
Combo USB3.0 from your system’s hardware configura-
tion by double-clicking the symbol in the task bar. A
menu will open up. Select the DriveLink Combo USB3.0
to securely remove it. Then switch off the DriveLink and
shut down your PC.
4. Installing the hardware
Note:
Before you plug the DriveLink Combo USB3.0 into your PC/
Laptop, connect the peripheral devices to the DriveLink Combo
USB3.0.
Before using the hard disk drive for the first time, it must be pro-
perly partitioned and formatted. To format the HDD, right-click
on COMPUTER and then select MANAGE.
If using Windows 7: select START, right-click COMPUTER and
then select MANAGE.
After that, select DISK MANAGEMENT. Here all formatable HDDs
and drives will be clearly displayed. Right-click the USB HDD
and select PARTITION. The HDD will probably need to be initia-
lized; we suggest using the NTFS data system for Windows PCs.
Format the HDD to complete the procedure.
Warning:
Make sure to select the correct USB hard disk drive for format-
ting, due to all data saved on the HDD being lost when partitio-
ning and formatting!
1.ConnecttheincludedpoweradaptertotheDriveLink
ComboUSB3.0andapoweroutlet.
2.ConnecttheincludedUSB3.0cabletotherespective
connectoroftheDriveLinkComboUSB3.0andaUSB3.0
port on your PC.
3.ConnectIDEandSATAdevicestotheDriveLinkCombo
USB3.0asdescribedbelow:
a)2.5"IDEHDDsaredirectlypluggedtotherespectiveport
oftheDriveLinkComboUSB3.0,whichalsopowersthem
withoutanyadditionalcabling.
b)2.5"SATAHDDsaredirectlypluggedtotherespective
portoftheDriveLinkComboUSB3.0,whichalsopowers
themwithoutanyadditionalcabling.
3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharkoon DRIVELINK combo USB3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharkoon DRIVELINK combo USB3.0 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharkoon DRIVELINK combo USB3.0

Sharkoon DRIVELINK combo USB3.0 User Manual - German - 5 pages

Sharkoon DRIVELINK combo USB3.0 User Manual - Dutch - 5 pages

Sharkoon DRIVELINK combo USB3.0 User Manual - French - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info