Categories
753074

Sentiotec Pro D2i Manual

31
Zoom out
Zoom in
Previous page
1/562
Next page
EN
Installation instructions, for professionals only p. 31/70
5.10. Connecting foil sensor (optional, only Pro D2i/Pro D3i)
1. Feed the wires for the sensor through the cable gland 4 into the low-voltage
connection area 1.
2. Connect the sensor cables for the sensor to the terminals labelled “FF”
in terminal strip 2.
5.11. Connecting the safety cut-out
EN 60335-2-53 states that sauna control units with remote control may only be
usedforoperatingandregulatingasaunaheaterwhichhassatisedthecom-
bustion test described in paragraph 19.101.Alternatively, a suitable safety cut-out
devicecanbeinstalledinorabovetheheater.Thisshutsthesaunaheatero󰀨if
items such as a towel are placed on the sauna heater.
To install the safety cout-out device, perform the following steps:
1. Install the safety cut-out device in accordance with the operating instructions
for the device.
2. Feed the wires for the safety cut-out device through the cable gland 6 into
the low-voltage connection area 1.
3. Connect the wires for the temperature sensor to the terminals labelled “OSG”
in terminal strip 2.
Ifasafetycut-outisnotinstalled,ajumpermustbettedattheterminals
labelled “OSG”.
5.12. Remote start
The remote start device is connected using terminals “S”, “B” and “C”. “S” stands
for sauna mode and “C” for evaporator mode. “B” is a +24 V DC output. The pre-
ferred operating mode must be activated using a switch or actuator on the terminal.
“S” and “C” can optionally be allocated to user program 1 and 2 (see “Remote
start” on page 37).
… 31 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec Pro D2i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec Pro D2i in the language / languages: English, German, Dutch, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 15,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info