759907
6
Zoom out
Zoom in
Previous page
1/8
Next page
- 6 - 09/2020 Copyright © 2020, Fast ČR, a.s.
EN Pedestal fan
User'smanual
Prior to using this appliance, please read the user'smanual thoroughly, even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in the manner described in this user’smanual. Keep this user'smanual
in asafe place where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or
warranty card for at least the duration of the legal liability for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE FAN
A1 Front cover
A2 Fan blades
A3 Aluminium fan pole
A4 Control panel
A5 Base unit
A6 Rear cover
A7 Motor unit
A8 Power adapter connection socket
A9 Power adapter
DESCRIPTION OF THE CONTROL PANEL
B1 Display
B2 Vertical oscillation button
B3 Operating mode selection button
B4 Decrease fan speed button
B5 On/Off button
B6 Increase fan speed button
B7 Automatic shut-off timer setting button
B8 Horizontal oscillation button
DESCRIPTION OF THE REMOTE CONTROL
C1 On/Off button (ON / OFF)
C2 Decrease fan speed button (SPEED)
C3 Operating mode selection button (MODE)
C4 Vertical oscillation button (OSC)
C5 Increase fan speed button (SPEED)
C6 Automatic shut-off timer setting button (TIMER)
C7 Horizontal oscillation button (OSC)
Note:
The fan is supplied assembled.
USING THE FAN
Place the fan on ahorizontal, stable, dry and smooth surface within reach of apower socket.
Insert the end of the power adapter A9 into the socket A8 and insert the power adapter into aproperly grounded power socket. The fan
will beep and all the indicator lights will turn on for ashort moment. Then the fan will automatically switch to the stand-by mode and the
room temperature will be shown on the display B1.
Turning the fan on and off
While the fan is in stand-by mode, press button and the fan will start. "1" will appear on the display B1. Then the value "1" will stabilise
and you can make personal fan settings.
When not using the fan any more, press button and the fan will switch to the stand-by mode. Wait until the fan blades A2 stop
turning and then disconnect the power plug from the power socket.
Speed setting
Buttons and serve to set the air flow speed. Button increases the speed and button decreases it. The speed can
be selected in the sequence: 1 – 12. The selected speed will flash on the display B1 for afew moments and when the value stabilises, the
fan will start running at the selected speed.
Selecting an operating mode
To select an operating mode, use button . Repeatedly press button to select the desired mode: "Natural", "Smart" or "Normal".
When the operating mode "Smart" or "Natural" is selected, the indicator light above the selected operating mode will be lit. When no
indicator light is lit, the "Normal" operating mode is selected.
Operating mode "Natural" – in this operating mode the speed automatically changes from low to high and back in short time intervals.
Operating mode "Smart" – in this operating mode the fan speed is set automatically depending on the temperature in the room.
If the temperature in the room is ≥ 35°C, the fan will automatically switch between speeds 10 – 11 – 12 in 15-second intervals.
If the temperature in the room is in the range from 29°Cto 34°C, the fan will automatically switch between speeds 7 – 8 – 9 in 15-second
intervals.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SFN 2540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SFN 2540 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info