Do not use the appliance in small areas. Insufficient ventilation may cause overheating and fire.
Do not place the appliance in alocation where water or other liquids could spray on it. Water can enter into the appliance and damage the insulation. It can
cause injury by electrical shock or afire.
Place the appliance in an even, stable location. If the appliance were to tip over, the condensate could leak out, which could cause damage to property or
injury by electrical shock or afire.
Do not cover the inflow or outflow vents with wiping cloths or towels, etc. Insufficient ventilation may cause overheating and fire.
Be especially careful when the appliance is in the same room as ababies, small children, older people and people with insufficient sensitivity to moisture.
Do not use the appliance in locations where chemicals are handled. The appliance may be damaged by the effect of diffused chemicals and solvents in
the air.
Never put fingers or other foreign objects into the grille or vents. Be especially careful when children are present. There is arisk of injury by electrical shock
or damage to the appliance.
Do not place heavy objects on the power cord, and make sure that the power cord is not crimped or in any way deformed. There is arisk of fire or injury
by electrical shock.
Do not climb on the appliance or sit on it. The is arisk of injury resulting from afall or damaging the appliance if it tipped over.
Always insert the filters in safely. Clean the filters once every two weeks. Operating the appliance without filters may result in its damage.
If water enters into the appliance, turn it off and disconnect it from the power socket. Contact an authorised service centre. There is arisk of damaging the
appliance or an accident occurring.
Do not put vases with flowers or other containers filled with water on the appliance. Water may pour out and enter into the appliance and damage the
insulation, cause injury by electrical shock or afire.
SPECIFIC INFORMATION FOR APPLIANCES USING REFRIGERANT GAS R290
■Carefully study all the warnings.
■For defrosting and cleaning, do not use any other tools than those recommended by the
manufacturer.
■This appliance must be located in an environment that has no continuously running fire
sources (for example an open fire, agas appliance or electrical appliances).
■Do not perform any drilling and do not burn it.
■Refrigerant gases may be odourless.
■This appliance must be located in rooms with an area greater than 4 m
2
.
■This appliance contains approx. 45 g of refrigerant gas R290.
■R290 is arefrigerant gas that meets European environmental protection directives. Do
not make holes or drill into any part of the cooling circuit.
■The room in which this appliance is installed, operated or stored must prevent the
collection of such leaked refrigerants, that could be the cause of explosion or fire as
aresult of the refrigerant igniting following the start up of electrical heaters, cookers or
other sources of ignition.
■The appliance must be stored in such amanner that its mechanical damage is prevented.
■Persons working with or repairing cooling circuits must have appropriate authorisation
issued by an authorised institution that certifies this person‘scompetence to work with
refrigerants in accordance with the specific assessment of the association for this sector.
■Maintenance tasks must be performed solely on the basis of the recommendations of this
appliance‘smanufacturer. Maintenance and repair tasks that required the contribution
of other qualified expert personnel may only be performed under the supervision of
specialised experts in the flammable refrigerants sector.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sencor SDH 1020 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sencor SDH 1020 in the language / languages: English as an attachment in your email.
The manual is 0,6 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
