■The appliance must be installed in accordance with national electrical codes.
■An appliance equipped with an electric heating element must be located at least 1m from explosive substances.
■Please contact an authorised service centre for repairs or maintenance of this appliance.
■Do not connect the appliance into apower socket that is loose or damaged.
■Do not use this appliance for purposes other than those described in this user‘smanual.
■Contact an authorised installation technician to install the appliance.
■In the event that the appliance is tipped over during use, immediately stop it and disconnect the power cord plug from the power socket. Visually inspect the
appliance to make sure that it is not damaged. If you have any doubts that the appliance is damaged, please contact an authorised technician or customer
service.
■The power cord must be disconnected from the power socket during astorm to prevent damaging the appliance in the event of alightning strike.
■To reduce the risk of afire hazard or injury by electrical shock, do not use this appliance with asemiconductor speed controller.
■Do not lead the power cord under the carpet. Do not cover the power cord with carpets, mats or similar items. Do not lead the power cord underneath furniture
or the appliance itself. Lead the power cord so that it is not stepped on and can not be tripped over.
■Do not open the appliance while it is in operation.
■When the air filter is removed, do not touch the metal parts of the appliance.
■The manufacturer‘srating label is located on the rear panel of the appliance and contains electrical and other technical specifications of this appliance.
■Check that the appliance is properly grounded. Proper grounding is important for minimizing the risk of injury by electrical shock or afire hazard. To prevent
the risk of injury by electrical shock, the power cord has agrounding pin.
■If the power socket into which you plan to plug in the appliance is not properly grounded or is not protected by adelay fuse or circuit breaker (the necessary
fuse or circuit breaker is determined by the maximum current of the appliance. Maximum current is marked on the rating label on the appliance), please contact
aqualified electrician to install aproperly grounded power socket.
■Make sure that the power socket is easily accessible after the installation of the appliance.
■Do not use extension cords or power adapters with this appliance. Nevertheless, if the use of an extension cord is necessary, only use extension cords
authorised for use with the dehumidifier (available in most hobby markets).
■To avoid potential injury to people, always disconnect the power plug from the power socket prior to installation and/or servicing.
■All electrical wiring must be performed strictly in accordance with the electrical diagram located on the middle partition of the appliance (located behind the
condensate tank).
■Please bear in mind the specifications of the fuse - the PCB of the appliance is designed with afuse to ensure protection against excessive electrical current. The
specifications of the fuse are printed on the mother board, i.e. T3.15A/250V (or 350 V), etc.
■To prevent injury to the operator or other persons or damage to property, adhere to the following measures. Incorrect use as aresult of ignoring these measures
may cause injuries or damage.
WARNING:
This symbol indicates the risk of serious injury or death.
ATTENTION:
This symbol indicates the risk of injury or damage to property.
WARNING:
Do not exceed the rated voltage in your power socket or connected appliance. Otherwise, there is arisk of injury by electrical shock or afire as aresult of
excessive heat.
Do not turn the appliance on or off by disconnecting it from the power socket. There is arisk of injury by electrical shock or afire as aresult of excessive heat.
Do not damage the power cord and do not use an unspecified power cord. There is arisk of injury by electrical shock or afire.
Do not modify the length of the power cord, avoid sharing the same power socket with another appliance. There is arisk of injury by electrical shock or
afire as aresult of excessive heat.
Do not connect or disconnect the power cord when you have wet hands. There is arisk of injury by electrical shock.
Do not place the appliance in the vicinity of aheat source. Plastic parts could melt and cause afire.
If you register an unusual sound, unpleasant odours or smoke coming out of the appliance, disconnect the power plug from the power socket. There is
arisk of fire and injury by electrical shock.
You should never attempt to disassemble or repair the appliance yourself. There is arisk of damaging the appliance or injury by electrical shock.
Turn off the appliance and disconnect the power cord from the power socket before cleaning it. There is arisk of injury by electrical shock or other injuries.
Do not use the appliance in the vicinity of flammable gases or explosives such as petrol, benzene, solvents, etc. There exists arisk of explosion or fire.
Do not drink or use the water from the condensate tank. It contains harmful substances that may cause vomiting or digestion problems.
Do not remove the condensate tank while the appliance is in operation. There is arisk of the protection of the appliance being damaged and injury by
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sencor SDH 1020 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sencor SDH 1020 in the language / languages: English as an attachment in your email.
The manual is 0,6 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
