757419

Seiko 8B63 Manual

26
Zoom out
Zoom in
Previous page
1/27
Next page
English
English
50 51
Condition Solutions
Misalignment
of the date
The reception results are
successful and the precise
time is displayed, but the date
is not correctly displayed.
Set the date to the preliminary position “1” (the 1st).
Misalignment
of the day
The reception result
display confirms successful
reception, and the correct
time is displayed, but the
wrong day is displayed.
Check if the day is set to the correct preliminary position “S”(Sunday). If
not, correct the preliminary position for day.
Wrong
display of the
sub dial
The sub dial is set to the
time shown by the main
watch, but the sub dial
displays the wrong time.
Refer to “ABOUT SUB DIAL”.
Operation
The crown or buttons
cannot be operated.
Sufficiently charge the watch until it starts moving at one-second intervals.
When the date hand is moving right after a setting is carried out by a
crown or button operation, after the date stops, the crown and buttons can
be operated.
You get lost in the middle
of the operation.
1. If the crown is pulled out, push it back in.
2. The watch will resume its normal one-second interval movements
within 9 minutes.
3. Start the setting procedure from the beginning.
Others
Blur on the dial glass persists.
Contact the retailer from whom the watch was purchased.
※
For the solution of troubles other than the above, consult the retailer from whom the watch was purchased.
IN CASE OF AN ABNORMAL MOVEMENT
In the case that the watch moves abnormally or that the watch does not move at
one-second intervals even after the battery is fully charged, perform the procedures
from 1. to 3. and then set the preliminary positions and select the time zone.
(NOTE)
First, press Button B, and subse-
quently press Button A while holding
down Button B so as to press both of
them successfully.
1.
3.
Button A
2.
Press for
3 seconds
Button B
2.
Press for
3 seconds
0 1 2
■HOW TO RESET THE BUILT-IN IC
1. Pull out the crown to the second click.
➤
The second hand stops at the 0-second position.
2.
Press and hold Buttons A and B at the same time
for 3 seconds, and then release them.
➤
Within 5 seconds after releasing the buttons, the second
hand makes a full rotation and stops pointing to the
0-second position. Then the hour and minute hands will
start to move and stop pointing to 12 o’clock 0 minutes.
3.
When all the hands stop pointing to 12 o’clock
0 minutes and 0 seconds, push the crown back.
➤
The second hand starts moving from 12 o’clock 0
minutes and 0 seconds.
※
After the built-in IC is reset, the watch is set to the time zone LON. After completion of a system reset,
perform the following operations.
→PRELIMINARY POSITIONS P. 42
→HOW TO SELECT THE TIME ZONE P.11
… 26


Need help? Post your question in this forum.

Forumrules
1

Forum

seiko-8b63

Reset search

  • My seiko will not adjust for daylight savings time. Model 8B63 Submitted on 11-3-2024 at 20:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 8B63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 8B63 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info